Search results

Yeh metal lintel would be fine. Not too bothered how it looks as long as the wall is supported properly thats all im after.

Im Just thinking if i should just put in a 1200mm concrete lintel and brick up the arch to save me any more hassle in the future.

If i do rebuild it would i need to support the brickwork above the arch or would i be ok removing the arch and rebuilding it.

Its a bricked arch self support type. I was trying to avoid having to rebuild it. Theres around 5 bricks which have tilted foward from the top. The window opening is 1000mm. Would it be sufficient to tap the bricks back into position and wedge slates into the gap between the end of the arch...

Hi just had a quick question im doing a project on a house ive bought. I was in the middle of replacing a bedroom window with upvc window and the arch brickwork above it dropped from 1 side around 5 bricks. Whats the best way to repair this? Its a solid wall 9 inchs i believe the inside wall...

******* http://www.diynot.com/diy/threads/diy-gas.8090/ *******

******* http://www.diynot.com/diy/threads/diy-gas.8090/ *******

Done it. Got heating again. Holty thanks for your help.

Im not gas safe registered its my own boiler and im not touching gas or gas valves or burners etc.. if it did involved gas i would get someone in no question about it. Im just looking at the water/plumbing side of things? So what you reckon?

Do share

Hi thanks for the reply. I once replaced the one diaphragm in the flow switch body 7 months ago which i believe pushes the diaphragm and spindle to the left to make contact with micro switch. The diaphragm had a hole in it and was replaced and all was well again and dhw was working again...

Agile can you shed any light on this one?

Can anyone help please? Boiler runs a bit longer on ch when system is cold but when it warmer it cuts out and it cuts out straight away after resetting it and trying again? Just get a flashing power light. As said before dhw is fine and that doesn't cut the boiler out. Anyone?

Here is the manual for it. Thanks

Hi i was wondering if anyone can help. I have a halstead ace combi boiler and whenever i turn the central heating on it runs for few seconds and the power light flashes. Once resetted i then tried the dhw and that fires up perfectly and works. Its only when central heating is in demand the...

Just an update for anyone else with same problem. Its sorted now. Traced the fault to the ignition board. It was burnt and had bit of damage and there was sometimes continuity between neutral and live but no all the time. Changed the board cost £60 from ebay so not too bad since i saved on...

Agile should there be any continuity between the 4 pins on the gas valve solenoid as i checked for continuity on all 4 pins one at a time and there wasn't any continuity whichever pins i put my multimeter probes on. Thanks for your help i know your the man and you know your stuff after reading...

Ive only had this boiler that im working on if u look at my previous post i had a stuck diverter valve previously on the same boiler. I dont mind having a go at changing boiler parts ie fans diverter valves etc im not breaking the law.. but wouldn't touch anything to do with gas. So if i do...