Search results

Hi, Have a drayton rf601 and a digistat scr digistat scr on wall believe is faulty how easy is it to replace and will it work with existing rf601 thankyou.

Doe anyone have the web link tried one on drayton website but didnt work. Thankyou !

I have a greenstar 28i junior boiler connected to a iflo digistat scr which connects via wireless to remote drayton rf 601 thermostat. The boiler has a built in mt10 timer which wont work in timer mode so I have put it on the on position and control it via thermostat. Recently finding that...

sorry, where is the posting ?

Hot water working fine, but last week heating seemed to stop first thing in the morning so had to switch boiler off then turn back on and heating would then work, but tried this morning and boiler hot water fine but no heating. Please help, many thanks.

Do you mean on the tray itself as it has a plastic cover that goes over the conditioner compartment. Regards.

Hi, Taking soap powder all ok bit not fabric conditioner. I have cleaned tray but to no avail, any ideas ? Many thanks.

It does have a series of pipes undeneath but no stop values. To the lhs of the inserted plastic key is a plastic nut can this is undone to increase the pressure ?

Noticed that my pressure gauge is showing red. The boiler seems to be ok and hot water and heating ok. How do i increase the pressure - will I benefit from this ? Noticed that bolier has always had the plastic key inserted and in the lock postion. Many thanks for any advise.

worcester give instructions on to do this from link below but dont mention in step 2.1 how to remove the cover. Can someone please advise. I have been quoted by worcester that it will cost £250 which is excessive as the timer costs £40...

I just want to replace the MT10 TIMER programmer which you need to remove the cover for, just want to know how ? I have got the MI - link was in my post earlier but section 2.1 doesnt mention which screws ? or does it slide off ?

Need to replace the MT10 timer have looked at the instructions below section 2.1 - to remove cover but it doesnt mention which screws to undo to achieve this - it doesnt just slide off ? www.worcester-bosch.co.uk/cache/file/14/mt10-instructions.pdf Worcester want £250 to do this but I can...

Thanks for the info but have looked at the instructions and step 2.1 is to remove the cover, but I know I may sound stupid but it doesnt mention which screws undo it , i dont want to undo the wrong screws ?

I need to know to to replace it - not how to use it ?

Wont go any lower than 18C , How can I lower the min temp please Many thanks.

need to replace a mt 10 timer on a greenstar 28i - is it easy how do you get cover off ?

Does any one know whether I can repressure the boiler via the plastic key which I have or do you have to use the external loop connection which I dont have. I dont know which method to use and not sure if my boiler has a internal link in order to use the plastic key method. worried to use...

This is the second time this MT10 Timer programmer has failed on my greenstar 28i junior- wont work on timer mode(middle position) worcester have quoted £230 to fit it but I can buy it for £40 Does anyone know how to remove the cover and is it easy to fit this part. Kind Regards.