Search results

what the best power mitre saw for about £ 200 POUND

thanks for your reply these are single doors which are used as fire exits, i was looking at fitting thumb turn lock on the inside

looking for web site which give advices on fire escape regs do fire needs access from both sides or can there be only locked from the inside so exit can be via fire escape locks also looking for different types of locks which are available and can be used on different types of fire doors

looking for web site what give the current regs and types of locking systems what can be used on on fire exit doors , and supliers of fire exit door hardware

got some wall paper paste left over already mix from last weekend will it keep for this weekend

on decorating a bedroom at home , going to wall paper wall were head boards go against with a floral pattern, wall measures around 2900mm wide by 2400mm high, question ive got were will be the correct place to start middle , from a corner any help would be appreciated

looking at putting a set of wallpapering tools together what are the best quality tools to have which gives a good finish

need to make a repair on a ceiling with broken leather pattern on ceiling what the easy way to make pattern match or similar

what the large 4 pin terminal boxes

does anybody no were can buy a 35 amp 6 pin terminal boxes

had at a look at some old metal patio doors which 1 side has a misted up glass unit. The side with the misted glass is the non opener side the glass itself is 16mm overall and measures from edge of frame is 1875mm by 795mm advice im looking for how is glass removed and refitted and whats...

at the moment i have a large kitchen / dining room with a artex ceiling with a heavy pattern in it . What i would like to do is have ceiling returned back to a smooth ceiling and fit down lights fitted in ceiling what would be the best process for a plastering to following any help would be...

has anybody got any diagrams showing how to put a lights in a attic any help would be appreciated

ive got a bungalow with a intermittent leak in the roof , been in attic no signs of water coming through felt or a wet patch, been up on roof no slip tiles, did some pointing around ridge tiles but no joy still leaking in heavy rain , only signs i have of leak is a damp patch in ceiling were do...

how do you go about getting a fall on guttering for water to run smothly

what the best tool for removing wood beads on wood windows, i always seem to damage beading when using a chisel any help would be appreiated

went to measure up some misted up glass units fitted in wood frames, 15 years old, door has toughned glass fitted but for side windows have not got toughned glass window sil height measures from floor 500mm width of sil measures 450 mm from window frame to edge of sil should toughned glass...

does anybody have any ideas what normal 4mm float glass is per mtrs

has glass prices gone up , my normal supplier of sealed units has increase prices by considerable amount has anybody else come across this

does anybody no of any suppliers of the above mitre saw, bought it of e bay brand new some 3 years ago, motor brushes are worn out any help would be appreciated