Search results

Have not got a sparky lined up for the job yet i am on holiday in june so buying parts now ready for the job, Electrician can do it while i am on hols, i have already ordered a consumer unit, same as you mentioned, I have also bought the wylex RCD, WHAT CAN I USE THE RCD for then, Later i will...

I am buying a new consumer unit for a qualified electrician (Part P) to fit, Is a WYLEX RCD 63A 30mA. Ok to buy to connect to a 9.5KW shower, already installed, With 10mm cable 15 meters? It goes up a plasterboard wall then acroos the loft to bathroom, i have to buy all mcb's/ rcd's seperate for...

I have two problems with a new alarm system, First is with a CQR Bellbox, It's old with no instructions, Siren is not connected to circuit board and no strobe, i need to connect six wires to circuit board and six to a melcom 600 alarm panel, Alarm circuit board has RET-, SW- 4-,3+, +v2,-V1, Any...

Thanks So no issues with the work i have done? What are the best sockets to buy? from your experiance??

I have added some Cheap sockets to my ring main, Double socket above double socket so instead of two plug holes now have four plug holes. Two wires twin and earth 2.5mm in original socket with one twin and earth 2.5 mm going to the new socket . Only thing is only one plug hole works on the spur...

Thanks Fast reply, Already searched google for an hour will pay £2 cheap enough and better than buying new alarm. Thanks.

My brother-in-law has moved into a new house, Owner passed away, the alarm has the fuse removed and battery unplugged, When plugged in can clear alarm using 0123, can not get keyfobs working and need to set zones back up and disable unused, I have manual for new G3 alarm. Has any one got this...

Thanks. Thats been a great help.

Is there anyone out there that can help me with this hopefully fitting this tomorrow if weather okay. Also how do you terminate this swa cable. have seen things where it says the end needs sealing with some kind of compound.

Some info on my garden lights required? I have bought 4 X 15mm blue LED fittings each with 5mt cable, 12 volt indoor transformer, 6 way junction box with 10mt cable. THE only thing is i need to connect 2 * 10 meter cables together will i get the same voltage/amps after twenty meters instaed...

Also could somone please tell me the difference in cable size. I oppted for 6mm inside house because i thought it would allow me More watts to use outside. Would it of been the same on 2.5 mm Twin and earth?? If i bought 4mm SWA cable what diff would it make or is all this to do with voltage...

Excatly the same as my problem. First i would suggest turning cold water on boiler down using the servive valve and see if it heats on reduced pressure READ my thread 30CXI not lighting. Someone told me this.. plate to plate needs to be taken out run under tap whilst tapping and shaking it you...

BTW - don't have 2 RCDs in series not sure what you mean by this? Cable run inside house is ten meters. House circuit breaker that i wired garden circuit breaker into is 32 amps. Stright wire from there into the 40Amp RCD for garden.

MOD this is not a market stall post removed

THIS is what i have decided to do. I have wired a 6mm twin and earth to a 40AMP RCD which has two trip switches both rated 16Amps one of these will power my 25049 3C1.5 XLPE/SWA/PVC cable into garden buried 450MM deep then drilled through house wall and wired to RCD. How many WATTS would this...

THANKS MATE fixed it can go in bath now instead of shower. Will get boiler serviced next week from glowworn and maybe take insurance out. lol anyway to stop this from happening again??

got it out full off black stuff anything else need cleaning while i'm here?

how to clean plete to plate engineer job or can i do it myself?

Boiler is about 18 mths old has white impeller in never blew down it but it span well with fingers should i try and blow down it see what happens?

Hello again have been reading other threads and have just turned the flow rate down on the boiler to about 5 liters a minute and the water is getting boiling hot anyideas????