Search results

Hello, I have a problem with an alarm panel GD48, and I need to do a latest firmware update. The firmware is now 6.7. Please help me.

Hello guys I have a GD 48 panel and I whant to do a hardware reset to factory default. Please tell me the procedure. Thanks

I”ii do that Thanks anyway

Yes, sparky, I only have the panel (no transformer, no nothing) Only need the software If I don”t find....return to sendrer:D

No, I brought the panel from a friend and I whant to install it, but without software it is very dificult. It is a UTC fire and security system.

Hello Can someone help me with ATS8600 software? I have an ATS4099 intrusion panel that needs to be reconfigured. Thanks

Hello I have a dsc pc4020 maxysys alarm panel, and I want to send the burglar events by sms on my cellular phone. What kind of communicator I need in order to do this. The onboard pstn line is for sending data to a central security point who has devices that translates the codes sent by the...

Hello you guys I need any version of entrapass software (special, corporate, global) to see how it works with an intrusion panel dsc pc 4020 Can somebody help me?

Hello you guys I am working on a cctv ip system with Interlogix equipement like TVD 1103 ip camera”s and TVN 21p nvr. How do I setup the camera that in case of a network failure to record on the Micro SD card? Thank you

It is a dedicated hdd for dvr”s

Hello I use a Seagate video Hdd 3.5”, 64Mb buffer / 7200 rpm. It works fine since 2014

ok thanks for your hints for the moment I just whant to see the camera over internet on my cell phone without buying an nvr

Thank you very much

So it will work Thank you man

Hallo you guys I whant to install an IP camera, hikvision DS-2CD2020f-i, but I don”t whant to buy an NVR for it. I will connect the camera on my internet switch, and browse the image on my pc. It is possible to live view the camera on my android smartphone just by installing iVMS4500 without...

Hallo again So I allready set the output as fire, this output change state only if a fire zone changes state (in my case goes into alarm). It will provide 12 Vdc to the detector and only when in fire alarm it will cut off the 12 Vdc, the detector/s will be reseted, the operator will enter a...

I think to define the output as fire or fire delayed? It is ok?

I use appolo smoke detectors with orbis-rb-10004 apo base. The base contains a relay NO/NC. After a fire alarm the detector must be powered down to become functional again. I dont think I realy understood ”if you don't set them to latch”. If I set an output to latch, it means that it remains...

Hallo again Back to first question So my zone will be a fire zone, and the output to power the smoke detector will be......? knowing that after a fire alarm the detector needs to be reset (power down for a few seconds). I tryed with SWITC DC and FIRE outputs, it works both. The switch dc was...

Hallo On a site we have an ATS acces and intrusion system from UTC. All the readers where encrypted AES 128 I whant to take from this system 4 readers and use them on another site where they do not use encryption. My question is that the readers will work? Or I have to reverse the encryption...