Search results

I really appreciate the little drawing .pdf that you attached. I'm a visual learner so I really appreciate having this. My thinking is: 1. Lift the pipes 2. we do what you have outlined in the pdf drawing that you attached, steel straps, 6mm notch etc. 3. Place boarding over the top of this...

Done https://www.diynot.com/diy/threads/notched-loft-joists-oil-2-gas-conversion.638939/

Just had an oil to gas conversion done. The company who carried out the work notched my 100mm loft joists pretty badly in this location of my loft, as you can see in the photo. I have raised this with them and they are getting in touch with a joiner in order to put all this right. Question -...

How do you normally reinforce loft joists like these? What can be done?

Yes in my loft

You are correct it absolutely does need reinforced. The team who carried out my gas conversion have said they will put it right. How would you go about putting this right? presumably the pipes will need lifted , and joist reinforced

Just had an oil to gas conversion done. I want to improve the pipe lagging here. What should I use, Armaflex? I want to make the pipe insulation as precise as possible. Down the line I want to replace all the loft insulation and achieve 300mm depth or equivalent - but I'm concerned the boiler...

@ILEX How did you get on with this in the end?

Our drains are connected to a site drainage which goes off site to the sewers (or whatever its called) - so I don't think I need a soakaway? The drain goes to a U-bend which goes to drainage off site under the road somewhere

I have a concern about a drain at the front right of our house. This drain was blocked up beyond the U-Bend so I had a guy come and unblock it. I watched the entire process whereby he jetted it to remove the blockage, nothing unusual there. But what he revealed was that the drain is not holding...

I’m going for an oil to gas conversion and going for a combi boiler. Had a combi at our last 3 bed house and want the same again. No system boiler and water tank. Just combi. In our last property we had an Ideal Logic - which we couldn’t range rate which was a pity I’m keen on efficiency and...

Bump

The white Myson MPE222 - the red light comes on when the CH is activated on the controller. I'm wondering if it is stuck open... How can I check?

Just moved into new 3-bed semi detached home. Mid-1970s x7 Rads Water tank in loft for gravity fed DHW Non-insulated hot water cyclinder - (I have since put some jacket insulation around it) Firebird Silver Boilerhouse 26kw (installed December 2022) Pretty sure this is a vented but sealed...

Hi JohnD, Photo of the door: I believe this to be some sort of access to old flow and return pipe which was part of a district heating system or communal heating system which heated the homes in this area years ago. So a local Facebook group says. Indeed, the flow and return pipe enter our...

Black metal door on the gable wall of our house. We own the house and believe this door was part of the house ever since it was government social housing back in 1970s. Curious to see if we can get a key for this door as we want to brick up the unused cavity which lies behind it. Anyone know...

As the title states. See images attached. - it is a downlight that is used to light our front porch. - It has a dawn-to-dusk sensor. - Installed x5 years ago Can the rust be removed? It was supposed to be waterproof but it has corroded a little. Is this normal or can it be removed? Even the...