Search results

Hi, I have an open fireplace, I have re-rendered the rear of the fireplace, the grate I have has a large metal back to help deflect the heat, but my problem is the cement has now cracked again. How do I stop this happening? Is there any high temp ceramic tiles that I can tile the rear and sides...

Hi, after replacing the Plate heat exchanger I also now need to replace the pressure release valve, as it is seeping out the pipe to outside, I have had it apart, cleaned it up, but rusty marks on rubber not dealing properly, also I cleaned the brass seat for it too so that is now perfect, but...

Hi all, have just fitted a new plate heat exchanger to the boiler, cleaned out the pressure release valve as that was leaking too, now boiler works fine without loosing pressure or tripping the overheat, but hot water too the taps it way to fast so its running at 40 as shown on front of boiler...

Hi all, I have a Vokera Linea 24, when you power it up, it runs for couple of seconds and stops. There is no display at all, no red/green light either, does nothing when you turn to reset it. It started off by blowing the main fuse in the fused spur, which was replaced, but it just powers up as...

Hi, having a hob installed in my ex's kitchen, the hob is 6.8kw, the dual oven is 3.8, so I guess the 6mm is way too small for both, the problem is there is a socket next to oven, thinking that could have been used, obviously it cannot now. Do I need to put a new run of 2.5 in, with a 32amp trip...