Search results

Thanks for the reply. The present wall is is +4m with a 2m opening in the middle. What I want to do is to take out the entire wall.

I have made plans to remove the external wall, between my lean to conservatory and bedroom. I've already had plans from a structual engineer which requires me to fit 2 x 4.5m steels which is the wall length with a 2m access through. The questions I am asking is how many ackro bars will I need...

I would like to do a similar job in my 1936 bungalow. I would like to remove the old 5ft patio door and extend the opening by 2ft, leaving a 7ft opening. Could anyone advice me of lintel usage.

Just fitted Fluidmaster side entry Float Valve. Unfortunately the valve keeps pulsing water, which causing hot water attacks when using the electric shower.

Can I replace the bearings myself & where can I get a replacement bearing?

My Hoover vision HD 1400 AAA washing, machine makes a louder than normal grinding type noise when it is on a spin cycle.

http://media.diynot.com/17000_16097_20622_61817914_thumb.jpg The Cabin is approx 80 yards from the house. The shed is bed with armoured 2.5mm cable which the runs to another shed beside the cabin. I use that end to temp. run a garden light. The insulation is a fibre roll type

I will be using it as a family & guest room, Pasion Palace for me & the mrs, Football / Bar Room. Its a shame the kit was missing 2 Swedish blondes. I would like a double socket on each wall. 2 internal & 1 external wall light

I have just assembled a 3m x 5m Swedish Log Cabin. Could you please let me know what sort of socket mounting boxes should I use. (the cabin will have a insulated wood clad internal skin. Would it also be ok to obtain electrical from my shed which has a consumer box with RCD

I am preparing the ground work for a log cabin. The Cabin itself should sit on concrete pillers. Sales person suggested using concrete blocks instead of a formed concrete piller. Could anybody suggest which blocks to use (foundation blocks, medium density or dense.

I have no idea. present cam is positioned approx 3 o'clock when in the unlocked position

http://www.wickes.co.uk/Euro-Cylinder/invt/160684&temp=largeimage

Over the passed Two years I have had to replace 3 cylinders in my front UPVC door. syptoms are that we are unable to remove the door key, when the door is unlocked. What is causing the problem?

Thanks for your help. Would a 9.5 w Shower electrical connections accept the 10mm cable previously used for the higher watt shower

My 10.5 delux Gainsborough shower will not heat. Power supply checked & OK. Does this unit have a safety cut off which I need to reset ? Can I replace the shower with a lower 9.5w using the 10mm wiring used for the 10.5w shower What other type / brands of electric shower can be...

calibrate ???

It just took me a while to locate my previously asked Q.

How do you calibrate ?