Search results

Previously ok prior to relocating hot water tanks. Immersion only 6 months old. How do you calibrate immersion ??

Immersion heater keeps tripping.

Will check. Many Thanks for the advice

My resettable Immertion Heater keeps tripping. immertion heater ok prior to relocated the hot & cold tanks.

Many Thanks I'll try the hose tap job.

I would like to drain my hot water tank for relocation purposes. unfortunatley I do not have a drain tap fitted. What can I do ?

Can anybody Help. I've cut the outlet hole slightly too big for the tank connector, which is causing a small leak. What Can I do?

ManyThanks,

Can I fit 15mm & 22mm service valves, directly to flexible plastic barrier pipe.

all cold water taps & electric shower presently run of the mains. Not expected to need water supply in the loft House heated by storage & underfloor heating Thanks

Is it allowed for the hot & cold water tanks to be relocated into the bathroom. Tanks are presently located in the loft, but space needed for a loft conversion. My property is a semi Bungalow.

thankyou for your recommendations

Thanks. Could i screw/bolt the new into the old joist? If so what type of bolts shall i use?

Old joists left in place 4x2. New 8x2 joists needed for max 4.5m span. New bedroom in a bungalow loft with single roof window. Walls are brick. present joists sit on a wooden wall plate of similar dia. Thanks

How do I fit new joists

Can anybody help me with my original request. __________________________________ +++++++++++++ Your Thread has been moved to "Floors / Stairs / Lofts / Floor Tiling" which we hope will get better response, and tidied a bit. BTW, 450mm or 400mm intervals will match floor and ceiling...

SORRY I WAS ONLY TRYING TO MAKE MY INFO CLEAR FOR EVERBODY. RULES MUST HAVE CHANGED SINCE MY LAST VISIT ! sorry again i just cant help it.

ATTEMPTING TO CONVERT MY BUNGALOW LOFT INTO A NEW/SPARE SINGLE BEDROOM. I HAVE CALCULATED THE NEW JOIST REQUIRED 50MM X 200MM. WHAT SORT AND SIZE BOLTS SHOULD I USE TO SISTER THE NEW JOISTS AGAINST THE PRESENT (50X100). IS 500MM SPACING OK ? SHOULD I USE 50MM X M12 DOUBLE SIDED TIMBER...

IT WORKED THANKS.

SO THE SECOND RUBBER & WASHER IS SANDWICHED BETWEEN CISTERN & WC. WITH RUBBER NEAREST TO THE CISTERN