Search results

The 2 pin one in the photo appears to have locating slots and pegs so that you can only install it with the polarity being one way round.

Hopefully there will be a cnnector under the plate that will have brown blue and earth wires

From the user guide Operation when using the Top Oven for Grilling Step 1 Ensure oven timer is set to manual. Place the shelf in the correct position (see Grilling Guide). Place the food/grill pan on the shelf, po- sitioned centrally under the grill element. Leave the top oven door fully open...

Do you have anything like this hidden away...

Always happens in shady areas. Pressure wash off.

You place the supply input hose into a tank of your choosing. eg a bucket of water. As I said it's suitability depends on why you want one. If you don't know what your usage will be thern that it suggests you don't actually need one.

I'm fairly sure many amputees thought that until they lost their bits

Should have used a smiley.

It would be better with some sort of hard infil if you are going to put a path on it as opposed to turf up to the wall.

It depends what your inteneded use will be but a google search for one of these may be a suitable alternative for you. " battery operated no hose pressure washer uk " . I was quite impressed by the one I used. I didn't provide a direct link because they often don't seem to work.

Any help https://elkay.co.uk/sleep-mode-a-feature-that-may-interest-you/

I always thought noggins were to stop joists twisting as well as keping them apart, so yes I would use te same size as the joists.

Not an expert in refrigeration but if it has a Schrader valve can you not attach a car tyre guage and see if the system is actually pressurised rather than empty. I always thought that they were mechanically sealed after filling

Not sure what your model is but that looks like a pump assembly. Look at exploded view here using your model number if necassary. https://www.ransomspares.co.uk/parts/brands/neff/dishwashers/s513k60x0g__01/?p=4

Do you have an angle grinder that you could cut a channel across the exposed side to collect the run off. Cut the channel deeper at one side than the other to give it a fall.

Do you have a dual flush cistern. If so after use hold handle/button down until cistern empties after each use. As a first step pour a bottle of bleach down the pan and leave. overnight that might clear a partial blockage.

Doubt it has ever met any safety protocols. They can't value there digits very highly.

Pair of Stiltsons. You can't have damaged the threads by trying to undo it.

As gareth says it's worth looking at the coin op mechanism, possibly just needs a blast of ait or a bit of lube. Also do the covers have interlock switches that may have failed or stuck.Failing that try googling "arcade game repairs uk"

It looks to me from your drawing that the isolator can be used to switch thhe fan independantly, but can't say for certain without a proper circuit. You may be able to short out the isolator but it depends whether you have a timer model or not.