Search results

Thank you everyone very much for all of your replies. I have egg all over my face because I've just opened the Scantronics 9651 box and what did I find? Yes all neatly coiled up is an Ethernet cable and a phone cable that I ran up to the office to beside where my phone lines are connected...

Thanks for that. I've just tried your suggestions and no good here. Cheers Richard

Please see above Scantronics 9651 Dose it matter what cameras i have installed? Tho point I was making was simply that I had planned for part of the security system but totally failed to think that I might want to have some remote method of controlling the actual alarm system, or getting...

I put in all the security wiring under the plaster along with the feeds for the cameras but totally forgot to bring an Ethernet or phone connection to where the scantronics 9651 is installed. Now I am thinking of adding a communicator but have no means of connecting to the outside world apart...

I've just checked and it is set so that when the power fails it does not need a reset. I wish I could remember how I managed to set the alarm with the mains having failed! Hopefully you or someone will be able to suggest how to do it. Cheers Richard

No it's a Scantronics 9651. What's wrong about the 9651 PD? Cheers Richard

Thanks for your suggestion. I only use the A setting and for my sins I installed the system. It does warn me in the event of a power failure but I am not clear how I managed to reset the system whilst off power! Cheers Richard

I've installed a Scantronics 9651 alarm system and the other day the power to the building failed for several hours. I was in the building at the time (business premises) and wanted to set the alarm when I left but the normal method failed. After a lot of faffing about I managed to set it...

Thanks guys I rang Thermecon this morning and they thought that my problem was most likely to be due to some water getting into the oil. I emptied the three filter chambers and found some water in the two final ones. Now the boiler starts and runs like new again<G> Hope this will help...

Thermacon CH oil boiler fitted with ecoflam pressure jet unit with Danfoss BFP 11 R3 oil pump. It was working fine until a couple of days ago when it failed to complete the start-up sequence. I lifted the cover that protects the fan and electrodes and found that the fan shaft was hard to...

Surely the information in this thread is as relevant now as it was when the thread was started or have I missed something<G> Cheers Richard

Excellent, many thanks Richard

I've just read this old thread and am very interested in exactly how you are logging the time and date of the activations. I could do with a similar system to record when "visitors" pull into my yard. Many thanks Richard

Thanks, yes but I want to keep this as simple as possible. I get into the office... if the light is on the clock will have stopped at the time of the incident. I can then go straight to the DVR under the stairs downstairs and pick the time the clock stopped at and bingo. I really do not...

Then connect the Alarm Out contacts to a latching relay which sets, and lights a lamp, until you press the reset button. http://uk.rs-online.com/web/c/relays/general-purpose-relays/latching-relays/ Thanks for that useful suggestion which has got me thinking! Perhaps the most straight...

Thanks. BTW what does OP stand for please? There is no foliage in view so I'm not expecting any false activations. This particular system has been in place for a few days and I'm not aware of any false activations so far. Cheers Richard

Thanks but I want it there for security reasons and having it out of the way. I'm only planning on having to look at video footage in the event of either the main alarm going off (only happened once in the last year) or the sensitive area being violated which is the subject of this thread...

Er. yes<G> however where I'm based we cannot get a mobile signal. It's these Welsh hills you know. Cheers Richard

Thanks. Yes and the following is what I see on the back of it. 6 K/B Connect to keyboard 7 ALARM OUT Relay output. Connect to external alarm 8 + 5V and GND +5 V and Ground 9 ALARM IN Connect to external alarm sensor 1-8 I should just explain that the DVR and monitor are in an under...

Thanks, sounds interesting but can you expand on this concept of a time stamp alarm panel please. BTW my present alarm panel is a Scantronics 9651. Cheers Richard