Search results

Morse will sort it. Bob

For heavens sake he’s done nothing wrong it seems after 2 months you’re just moaning for mornings sake. Bob

I wouldn’t get a recon I’d get a new boiler and dump the stove you’ll get more efficiency out of one. Bob

When you try to start it what noise do you get. Bob

Looking at that sight gauge I’d say there’s water about as that looks like emulsified oil and water so be careful not to drag any through the fuel pump. Bob

You can talk all you want to firms but there’s not many who take any notice of you, just get on with sorting out the prob. If you have a valve inside the boiler take off the oil flexi and gently open the valve after putting a dish underneath it to catch the oil if it flows ok with no sign of...

Well there you are if that’s a room sealed job you’ve just left yourself open to prosecution and a big fine or even prison god almighty. Bob

I still have a box of very old but new SKF bearings zz type fit and forget when they’ve gone the motor is done. Bob

You can burn out bearings by over greasing them. Bob

That’s the prob. Bob

Try refilling it from the bottom eg with a hose into a drain off cock that sometimes works well. Bob

Ha ha ha. Bob

The cap unscrews then there is a screw behind it. Bob

You shouldn’t aks gas advice on here sorry. Bob

Check if the flow switch is faulty first then check if the boiler stat is turned up to what it should be then check the Dow stat is turned up there are many things that can cause this all that’s needed is sensible fault finding. Bob

There are loads of these in use around the country if they break down the water company fixes it, no problem. Bob

Yup change pressure switch. Bob

Mag flows should be on return to stop boiler getting bunged up with crap. Bob

Yep nothing of any mystery on an oil boiler. Bob

That bit looks halfway to being knackered now external loop. Bob