Search results

Well said

Again Martin it could well be a blockage but would be unusual that everything worked for 20 mins. If the cold feed was blocked and the systems got no head then usually you wont get anything but banging from the outset. If he comes to change the pump ask him to check for a blocked cold feed...

You need to be looking at option 2 However if you are going to all the trouble for a crappy old valve why not just replace it with a new spring return valve which will last alot longer. Infact why not get someone in and have the system sorted so you can get independant control of both...

Have you got the rad the right way up or will it only go one way. Homebase towel rads have a red sticker which falls off in the box and is supposed to indicate which is top....or is it bottom :? Stan

Tony its either the solid long type such as in the baxi back boiler type pilots or its the post injector airated model with the little holes areound the top of the injector. I cannot remember which now as the mists have fallen, but I remember idiots who used to take the turbo 2 apart and fit...

Yellow drive open White drive shut Its a drive open drive shut valve mate, not a sprung return. think its an SD2301 Might be out of your depth by the sounds of it so pass the wiring onto someone who knows Stan

In actual fact Martin it sounds like you have found a gem of an engineer there so try to move away dissing him I would have done the same thing from your explanation an too often plumbers jump in and charge a fortune to change the pump when it is actually the pump over run stat so I take my...

Yes and Yes :)

Ahh you must be talking about the waffle valve that stick behind the jiggle pin Corgiman. Stan :lol:

I agree with Corgiman. probably find water is peeing from DHW connections on h/ex and then dripping onto the board. Either that or the relay is stuffed and has now turned into a blob of molten plastic also stuffing the board and the connector behind it. I have a board and a set of new...

Find it very unlikely that even at 300mm that its causing a problem and even if it was the regulation only came into effect last year I think so how new is their boiler?? Having said that if my neighbour slapped a great wall in front of my boiler flue and it was that (which I doubt) I would...

Might do but probably better and cheaper to just replace with a decent brand like honeywell. Is it a drayton or danfoss by any chance Stan

Sounds like you have a Lynx 1 with all the lovely lights on. My suggestion would be the modulation board. As Agile said there a 3. A big one which the other 2 plug in to If it has ignition problems then its the ign sequence board and if as you say its not modulating regardless of...

Why on earth did you have an Isar put in in the first place!! Sorry but its got to be said Stan

There will be a dry joint on the 2nd to last or last pin on the strip connector which has 5 wires coming from it. The red wires you refer to are for the fan and its not those you want to be looking at. I have had to many to mention in my time and its always the same joint that goes on the...

I agree you can still get all the main bits that go wrong and that aint many. Stan

Steady on Costy old boy we know, but we have now moved on to arguing amongst our selves for a bit. You just hang on we will be back with you in a sec :D The clouds of time have not been kind to me clf Stan

You need to read carefully my old fruit then get back to me again. I might be getting old but I trained engineers for ACS for 5 years and that bit aint changed.BS 669 IS the BS for LPG hoses. Nat gas hoses are to a different BS also. Stan

WRONG!! check your facts if the hose is to BS 669 then it is O.K. Stan

Yes and if you were LPG then you would realise that a hose to BS 669 IS for LPG and WILL have a stripe or band in red on it. Stan