Search results

No it's after the pump but tees off before it gets to the port valve for the other rads.

Thank you but actually it is the closest one and is fed before it gets to 3 port valve.

I put on a vertical rad the other day and After clearing the airlock in The system got all rads going except this new one So I turned all the other radiators off And managed to get it hot. When I put the heating back to normal it was the only one that wouldn't heat. I tried Bleeding it And the...

it must be because there isnt a back to front theres only 1 flat surface side

it already came with blank and bleed cap fitted

thanx will try all suggestions

after changing towel rail for a tall vertical rad,i am having trouble getting heat to it. i managed to get it hot when i forced off all other rads but it wont get hot with the others turned on. it is the first rad fed before the 3 way port. i have bled several tubs of water from the bleed valve...

I didn't move valves from before it was drained

After draining and then refilling system had lots of trouble first with blockage from the f&e tank and then air locks. I eventually managed to get all rads hot by doing one at a time and closing all others off. But started up next morning and its back to several rads hot and a couple cold and...

Will do . thanks for yr time

Great thanks. DIY job?

Oh right because it does sound like the fan is running. What is APS ?

Oh right because it does sound like the fan is running. What is APS ?

Oh right because it does sound like the fan is running. What is APS ?

Reset light flashing at twice the speed of burner on light

no hot water and f&e full.

they werent like for like size wise, but that aside can you help with my boiler problem

HI i drained my central heating system today to replace a couple of rads and check my 3 port valve as i think it is stuck on heating only. replaced rads and checked valve. needs replacing but didnt do it today. i filled the system up and bled everywhere sucessfully bur when i went to start...

HI i drained my central heating system today to replace a couple of rads and check my 3 port valve as i think it is stuck on heating only. replaced rads and checked valve. needs replacing but didnt do it today. i filled the system up and bled everywhere sucessfully bur when i went to start...

Hey, i've got an outside tap that rumbles when you turn it on, so i installed a double check valve because i heard its something that is always supposed to be on the line for an outside tap, but now instead of rumbling it just pulses. any ideas??. thanks