Search results

  1. C

    Bell tamper and battery low

    Comfort LEDs are off
  2. C

    Bell tamper and battery low

    Hi, It’s wireless and installed Feb this year. Other than installation test the sounder has not gone off except for these occasions. Battery low and tamper is in the logs, but nothing on wireless keypad when arming. Thanks Dave
  3. C

    Bell tamper and battery low

    Sorry, it a Texecom premier elite 64
  4. C

    Bell tamper and battery low

    Hi, Whilst away I received a notification from my alarm of a bell tamper and immediately after a bell battery low warning. It’s a Texecom Premier Elite 64 Neighbours were there and there was no tamper. Unarmed and rearmed. Ok for 6 days then exactly the same again. On returning home there...
  5. C

    Texecom SmartPlug

    Hi, I would like the plug to turn on when the alarm is fully armed, but not turn on if just the garage is armed. Currently it turns on when just the garage is armed and when its fully armed and timer is active. Part arm is achieved by omitting house zones leaving the garage zone active. all...
  6. C

    Texecom SmartPlug

    Was thinking that, just hoping that there was a way round it leaving all in area A. Thanks Dave
  7. C

    Texecom SmartPlug

    All pirs etc are in area a. I use part arms with, for example, garage part arm, all detectors omitted with exception of the garage PIR.
  8. C

    Texecom SmartPlug

    Cant work out how to do this via recipes. Is the only answer to move the garage sensor into a new stand alone area. Thanks Dave
  9. C

    Texecom SmartPlug

    With every solution comes another problem :( All zones are in one area. I have one zone sensor in a detached garage. I part arm the garage at night. Part arming is achieved by omitting all the house zones leaving just the garage. When I part armed the garage tonight the SmartPlug turned on via...
  10. C

    Texecom SmartPlug

    Thank you very much for your help. Added text to Area A and can now program the recipe to work only when armed. Many Thanks again. Dave
  11. C

    Texecom SmartPlug

    1. I guess you mean armed or unarmed, it's unarmed. 2. Not set up areas d]so they are default, no name 3. timers on panel not used just using timer on the app, which is called evening timer 4. lounge light 5. an iPhone 6 via the app Hopefully I have answered correctly, thanks for you help. I...
  12. C

    Texecom SmartPlug

    Just one SmartPlug currently which works fine on the timer alone. Just when trying to add when system armed in the recipe causes I get the error message. All zones in area a.
  13. C

    Texecom SmartPlug

    Hi, This is a very basic setup. Just has 7 zones all set up in area A. With part arms by omitting certain Zones. Panel firmware is 5.02 and smartcom is 02.01.05. just started playing with the recipes, trying to get the smartplug to turn on when its dark (set up the timer for this) but want to...
  14. C

    Texecom SmartPlug

    Hi, I have a self installed Premier Elite 64 and have just purchased a couple of texecom smartplugs. Have added them to the app ok but having problem setting them up in recipes. all i want want to do turn a light on when dark and system armed. Set up the timer but when i try and add system...
Back
Top