Search results

ok thanks folks! So need to fit pump overrun that's what I guessed. transam-Reason for fitting this boiler we were limited by size to fit in so went for this one as fairly small. (and seems nearly all new condensing boilers need overrun) On the wiring- no problem with existing just...

Hi folks, just had a boiler fitted (glowworm flexicom 18HX regular condensing.) It should have a pump overrun fitted acordging to glowworm. Question is will it damage the heat exchanger if there's no pump overrun? Or is it just a 'recommendation' that isn't really too vital? (Think I...

thanks folks! really helpfull. If we were living in the house for a whle i'd go ahead and install and not worry too much (although yes, for warranty purposes would want a proper commission with tests from a gas safe so manufacturer doesn't have an excuse to not fix a fault..) but we're...

ok thanks. so does that mean if someone was willing to do it they'd be breaking the rules of the registration scheme so can't really do it? So for info, the only option for diy install (following the rules) is to 1. Get a Gas Safe to commission & test (for sake of running the checks...

Hi folks, I'm thinking about replacing my boiler myself. Before I start I know this has been discussed many times and don't want to start another unnecessary thread on diy installs. I count myself competent (to avoid starting another thread I'm not going to list why) and will be happy for...

Hi folks, can't find my keys.. I have a spare ignition key though. (Doors and ignition are a different key, probably ignition has been replaced at some point...) Does anyone know if the code for the keys is on any of the door lock barrels?? (If it is I can probably use the code to get a...

Hi folks, hadve a galaxy shower (neptune exotic) had a minor drip from the flow valve (looked like it was dripping from the spindle bit). Replaced the valve assembly today and fitted the new little o ring where it goes into the presure switch thing above and the main heater casing bit to...

thanks for that alistair.. will do. yes, soffit area is a bit blocked with insulation. should i remnove the damp gyproc- isn't doing anything useful is it? could the gyproc be adding the trapping moisture?

easily done... minium damage- get a new key cut. All you need for this is the code for the key. Your ford dealer will give you this (for free hopefully) if you give them the registration number. likely they'll want you to take the registration document in or something as proof you own the...

thanks folks! happy not having to redo roof! It is cold at the moment so condensation makes sense. Also have expansion tank for heating sitting in loft so that would add to it i giuess. The soffit has vents all the way along though. Should I just leave it seeing as its probably not damp...

thanks, tiles look fine outside as i say but something must be up with them. They're large size black, flat tiles. 25 yr old house shouldn't have this should it? Worth asking the neighbours maybe... photo of area - spans about 4 joists: closer, you can see the water on the joist at the...

Hey folks, was in the loft to sort some stuff and looks like I have a leak. It's a 25 yr old semi with usual modern tiled roof. Weird setup though - from the inside I can see it has joists as normal, but on the outside of the joists is a layer of gyproc board (ie outside of house side of...

Hi, a pal of mine has bought a reclaimed carpet for a normal double size bedroom in her flat. She says it's in good condition.. I've done just about everything but carpet- I know it's not easy & it should be stretched using the gripper tool but not ripped..! Questions is, does it always...

yes, warranty has nothing to do with it, it's the sale of goods act, needs fixed by the garage that sold you it for no cost to you. don't delay or back down, get trading standards involved if yoiu need to. Any probs and write a letter to the garage, give a copy to trading standards then you...

yup, if it starts the end must be inside the barrel- you wouldn't be able to see it really either... yes, some keys have the key code on them, pop in to your dealer with the key and ask, saves having to fit new locks all round.. (but keep the old key for now to use in the ignition for now!)...

cheers guys, yup, no shut off on the inlet to the hot water tank either, but yea, forgot about a bung, thanks. I did that for my central heating, worked great, forgot all about it.. on the circlip- it was there and fine. took it off and put it back on. Is it worth stripping the tap to...

hi, i'd crawl into my boot and take the panel off the inside of the boot and that should let you in at the lock mechanism from the inside to flip the lock open yourself. I've done this on lots of cars, can't guarntee will be ok for your astra..

Hi folks, easy one for you plumbers... when I turn my hot tap (to turn it on) not much happens for a few turns then it 'catches' and suddenly turns on. Turns off as normal. It's a kitchen mixer, hot & cold tap at each side. I've taken the plastic head off the tap but the only thing to...

cleaned the filter, took off the pressure sensor, blew it and got the click on & off no prob. Now 99% sure it's the rinse solenoid valve. I took the plug on the solenoid valve (which conveniently stops you swapping the plugs round..!) and put the plug for the rinse valve onto the wash valve...

cheers, fantastic, that makes sense... will give it a go today and let you know. thanks.