Search results

I grouted my Indian stone paths and patios several years ago with Easyjoint to a depth of 25 mil as instructed, result was very good. After several jet washes the grouting has worn leaving a depth of approximately 10-15 mil. , 25 mil in some small areas. To rake out again to a depth of 25mil is...

Many thanks for that! I have a simple situation. The rad has no TRV .My query is how to set the rad lock shield and wall stat to stop the boiler cycling on and off.

Stat seems ok, rad is 6 feet away. All rads have thermostatic valves except the one in room with stat on advice when system updated. Thanks

Old install

Hi The waste from the bathroom basin exits straight through outside wall, a distance of only a few feet. It is independent and no other wastes are involved. It is very noisy on emptying. Is there a fix please? Thanks

Hi I have a wireless thermostat in the hall which has a radiator. The boiler is constantly coming on and off, the pipe work is noisy! Should I turn off the radiator, leave it on full or move the stat to another room/location? Thanks

Thanks all, will order some 12volt HNY

Sorry, thought the first had not posted. Any advice, can I use 240 volt bulbs mixed with 12 volt on the same string? Thanks

Other post? Was awaiting email notification of reply, not working Thanks for links, will order.

Hi , Can I replace E12 3 watt 12 volt bulbs on my Xmas lights with 7 watt 240volt bulbs on 240 volt circuit in series? Can't find original bulbs. Thanks

Hi I cannot find replacement 3 watt E12 12 volt replacement bulbs for lights on 240 volt circuit. Can I replace with E12 240 volt 7 watt bulbs Thanks

Yep any recommendations? Thanks

No luck ,can’t seem to shift it. Plumbers merchant says he’s never seen one!

Thanks will try that

Thanks -so do I turn it, pull it, prise it? I don't want to damage it . Doesn't appear to be any "flats" to get a wrench on.

The white plastic part is not secured by a screw. It has a threaded hole in the centre for the fixing screw. How does the red part detach, do I prise it and pull or should it unscrew? Thanks

Thanks will try that

Hi How does this cartridge remove please, no apparent fixing. Do I simply prise it out or does it unscrew? Please see photo Thanks

I have a side hinged steel garage door factory painted in Anthracite. I'm unsure if it's powder coat finish. It's starting to fade slightly, mainly on the top third. There is a noticeable difference in depth of colour between the inside and out! Is there anything which will bring back the colour...

Thanks Just seen Semco but seems expensive!