Search results

Is a blown fuse at the plug the worst that can occur?, the supply comes direct from a 20 amp fuse at the board.

Thanks for that, any suggestions to keep it safe?

That was the plan that ok? will only be used for small appliances,kettle etc.

Thanks, will 1.5mm flex be ok?

Can I feed a new double socket from an existing socket (on 20amp fuse at board) by simply plugging in to the supply socket.Access is difficult to chase the wall.Cable will run behind cuphoard units for 6 meters.I understand it should be 2.5mm cable and I'll use a RCB. Also is it permissable to...

Not yet,but he will need to come back to service the boiler soon, is the cost of a service close to the cost of the Salus?.................. :wink: Thanks again all.

Update Fitted a WB DT10 RF so WB would have no excuse if the problem re-occurs,but so far no problems and much easier to use. Thanks for your comments.

PS Lights are 100 watt each

Hi I have two existing outside lights at the side of the house, switched independantly from a double switch inside the side door. I would like one (close to the side door) to operate via a PIR so I can see to get the key in the lock when dark!. I would also like to be able to switch it on and...

Sorry to raise this yet again,but has anyone come up with a definative answer to which gloss and satin paint is least likely to turn yellow quickly? Thanks

Thanks DP I spoke to WB technical and they of course reccomended the WB unit, however which RF controller would you suggest in your experience? Needs to be user friendly and I don't need seperate programs for weekend etc,HW can be on continuous.

Installer says he will re-emburse me with the coat of the Salus. If I remove it I will have no contol over the CH. Would you reccomend fitting a WB DT10RF, then maybe WB would have no excuses?

Thanks for that, but who are "we" in your post?

That did occur to me but I didn't like his attitude and manner, got the impression he was glad to go without doing anything,kept complaining he would be late home. Anyone from WB care to comment!?

Thanks for quick reply! My installer insists that WB deal with suspect stat under warranty and that he has "fitted dozens" of Salus controllers with no problems. Is 9 degreesC not too high a setting for the frost stat?

I had a new WB 37cdi combi fitted in May 2012, complete with a Salus ST620WBC RF controller. The boiler and CH is coming on randomly without the Salus calling for heat, typically during the afternoon and early hours of the morning.I was advised that the frost stat on the boiler is...

My daughter moved to old house with a WB Junior 24 combi boiler fitted in a bedroom?! Although there are TRV's on all the rads, there is no stat fitted to control the overall temp. Can anyone suggest an RF controller for this model of boiler? If not how do I wire a stat to be fitted on the...

Just to confirm, I've fitted a double socket which will only be supplying a washing machine and light for the gas cooker. We now have no space for a dishwasher. It's 6mm2 cable approx 8 metres back to fuseboard with 30 amp fuse fitted. trust that's ok. Many thanks to you all!

Thanks again

Yes thanks,but my query is what fuse rating do I use at the fuseboard to replace the one removed and lost by the builder?