Search results

Sorry I lied, all the spares sites are coming up as a discontinued spare! You could try contacting Deva on 0800 195 1602 to see if their tech department can help with stock or a suitable replacement. Jon

@thetcutkid are these basin or bath taps? Made by Deva? I think I have a link to the cartridges for you if you can confirm these two things. Jon

Not a problem, fore warned is fore armed. As you can see there are many different types hence the reason to remove it and match it at the merchants. Make sure the spline count is right too. The merchant should have a tool that will slip over the spline and give the correct measurement. Jon

You should try it, I've seen your work and with a couple of words you can make a person and multiple posts disappear! Jon

I have a bucket with a hole in it? any good? Yours for £42 + £42 P+P Jon

A - I didn't price that thats what I get charged to calibrate my Regin T100 pump. I can't control that!! B - I'm only inferior in your head as I do this part time. I have a decent pension and do this as a hobby to help people out that are being charged stupid money for inferior work! Oh and to...

If you did get banned Steel you could try a new hobby? Magic maybe? If you get good you could always progress to Wizard status? Something to consider. Jon

Ssshhhhh I was being flipant! and I gave a rough price for picking it up. It would never happen though as I would always call first and then I would know everything that I need to take with me. Jon

Pushing what? I normally carry a spare as i do with almost everything ever made so I only have to do one visit but if it did happen then I would only charge a nominal fee, probably about £25 or something. Jon

Learn to read my posts properly :whistle::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO: Jon

My Regin pump has the in built N/O2 4 stage blending valve fitted so I leave the mixture control to that. It's calibrated every 3 months to achieve the optimum blend. I had to have a special canister attachment made to allow an extra bottle to be fitted. This introduces a dab of Ar and CO. I...

I've found that they perform better if you remove the factory precharge of air and replace it with a premix of nitrogen and oxygen at roughly a 4:1 ratio. Obviously it cost the customer a little more but the long term benefits easily out weigh the initial cost. Jon

Just spat beer on my laptop! Cheers Dickie! Jon

I went there Friday was really busy, think they were catering for a wake. The waiter told be they only had 2 fish and 5 loaves left but there must still done 5000 meals that night! How does that work!? Bloody expensive though, the waiter (Judas somethin or other) wanted 30 pieces of silver...

Glad to hear it, now the most important thing. Does it work now? Jon

They are definitely ceramic cartridges in those. You will need to: Isolate one tap Pop off the top cap Remove handle assembly You will have a brass section with flats on it resembling a bolt. You will need a decent sized spanner to lock onto this and then you will need to hold against it on the...

Result. What els do you need to know? Jon

Hi Nick I just had a quick search and they look very similar to these from Victoria Plumb. If you read the first review it states that the caps on the top unscrew on these so chances are yours will too. Hope this helps Jon https://www.victorianplumbing.co.uk/ultra-series-2-basin-taps-chrome-fj311

If you can remove the copper stab or straighten it out you may be able to get a monobloc socket onto it. Maybe even use the socket to help straighten out the copper. It will be a right pain in the ass and I doubt it will be worth the trouble. Jon

Those top thin discs will come off. Below will be a screw. They will either pop off, use a stanley blade or thin screwdriver at the rear or they may have a short thread and actually be screwed in. A set of grips wrapped in tape to prevent scratching will be needed. Jon