Search results

  1. J

    Cold rads?

    Hi Picasso, thanks for reply I have got all rads off except the problem one and a small one in bathroom which gets red hot, for comparison,but problem rad still not getting hot. I did the same the other day, to eliminate balance problem, although I have just rebalanced them again,rad got...
  2. J

    Cold rads?

    Hi Guys, need a bit of advice please. I have two old rads that are not getting hot, barely warm. I flushed one ages ago, Black,no change. I suspected crud, but just drained the other one, and the water is crystal clear, could drink it! Was going to flush it, but didn’t bother . Can I just change...
  3. J

    Re ideal accent flush diaphragm change ?

    Hi Guys, seem to have hit a snag. Put new Fluidmaster siphon in tank, but of a game with adjustment for overflow height, and side handle, which is not adjustable like front handles, just a hook, had to set at 8 inches as bell housing was impeding side flush lever, only one hole for hook...
  4. J

    Re ideal accent flush diaphragm change ?

    Feel like it sometimes:mrgreen: It’s not a big cistern, only holds two phones out of curiosity. Are all pans the same height from the floor to the straight P outlet through the wall. Just in case I deem to change it? If the seat screw goes again, it would be cheaper to replace the lot, than...
  5. J

    Re ideal accent flush diaphragm change ?

    thanks andy, got screw fix local,£20 job d one, cheaper than new loo, sprayed wingnuts with oil overnight to so they ,Might, not shear
  6. J

    Re ideal accent flush diaphragm change ?

    Don,t know if these help. Ignore first, test as you can see, even lagged inside to try to stop condensation, no good though.
  7. J

    Re ideal accent flush diaphragm change ?

    Thought about it, but it is one of a suite and in a corner, one of the costliest they make , even though it gives me grief with seat screws shearing and as I said,£220 for new one. Yet siphon. Had lasted 24+ years ! i am still trying to find how to post a pic.It Condenses like hell,I put a...
  8. J

    Re ideal accent flush diaphragm change ?

    Thanks again.I will try to find out how to post a pic. cannot feel a ring! had the whole toilet out several times, but never split it,hope the wing nuts don,t shear ! is the Dudley duo 88 ok for right side handle ? Good of you to help.
  9. J

    Re ideal accent flush diaphragm change ?

    Thanks newboy for reply. I am useless at posting pics, don’t know how? I will try if you are to tell me how . it looks to me to be in one piece ! I was just looking at the Dudley turbo 88. I have had the suite over 24 years. Flipping expensive, over £200 for a new seat, had three in the past...
  10. J

    Re ideal accent flush diaphragm change ?

    Hi Guys, I have an Ideal accent close coupled single flush toilet cistern , with side handle,and it won’t flush! Presume it is the diaphragm . Don’t know what the part is called , other than diaphragm ? Does the whole flush system have to come out of the cystern to replace it, which means the...
  11. J

    Ebac dehumidifier 2800e

    Thanks jj,ebac said a new one costs £29 delivered, so opting for that. I saw that though.cheers
  12. J

    Ebac dehumidifier 2800e

    hi guys, having trouble finding a spare fan motor for my 2850e ebac? For some reason, all spares companies Don,t recognise my model? It,s a smart one, and I can locate a 2600i for £36,but don,t know why not a 2850e? Don,t know if they will interchange? Ebac are no help. £50 to send it to them...
  13. J

    installing new boiler

    Thanks gents, don,t want to cause upset in the camp, but having hadseveral "engineers" out, most have had to either phone vokera tech sevices, which I have done several times, very helpful, or someone else.The last one, as I said came and left after 1.5 hours, giving up and leaving several...
  14. J

    installing new boiler

    most reluctant to give up on it, quite attached to it now, keeps the grey matter going now retired,know when to let the pros in, when one can get one, very difficult in this area.it,s not just the wasps that sting you around here
  15. J

    installing new boiler

    Hi, Thanks for info, all things mentioned checked and are ok.Fan slow running until demand then on high, turned water down to slow flow rate at tap, boiler cut out on safety stat, pilot still on. thinking of changing thermocouple when I can locate the right one, changed it about 9 years ago. I...
  16. J

    installing new boiler

    The reason for enquiring about regs isI am plagued with wasps every year, had two nests in boiler, resulting in new pcb board once, I frequently remove casing to check no nest , they build them pdq
  17. J

    installing new boiler

    Hi, thanks again, my Vokero rs 20-80 flowmatic,which I reckon is 15old, has been having trouble with pilot light going out, with no set pattern.sometimes twice a day, then it can run for several days ok then it goes out again. I can have a showerok, get out, my wife get in 5 mins after and the...
Back
Top