Search results

under the boiler .... i think !!!

There seems to be 2 valves, each with a little silver box (stamped Honeywell 8838 and Honeywell 8837) with a lever. When the stat is moved, both boxes give a slight click and then run. One of the levers moves and the other remains still when the stat is turned back down agian.

Thanks for the help so far KP. Can you just confirm : when I look at the valve and move the stat, the motorised lever should move ? I am not sure what you mean with the screwdriver between the casing.What am I supposed to be doing here/ listening for ? Sorry for my lack of knowledge.

OK but how do I check it / what am I looking for ?

What and where is this ? How do I check it ?

When I adjust to the timer to continous (or if it is timed to come on) you can hear the fan running but nothing else happens. No clicks etc as if it is even trying to fire up. I removed the PCB to check for anything obvious but nothing there. I also had a new solenoid fitted a few...

There is a flue going outside if that helps. Not sure if it has a fan timer board. Obviosly the fan but what does this board control ie. what are the effects of it working and not working.

I have a 20 year old Apollo Fanfane boiler and a Honeywell timer that has the settings - off,continous,twice and once on it. My heating at present will not come on. When you put it onto the continous setting, you can here a noise coming from the boiler as it starts up but thats it - no...

Anybody know what colour of wires to check and the voltages I am looking for from the small PCB to the Gas Valve ?

What would you think it is then mate ? ie. what would a service achieve to sort my problem ?

No , it is just outside Glasgow mate. I have read elsewhere that it may be the Thermocoupling on the bolier that needs replaced / cleaned. Is this a simple job for an engineer ?

about 2/3 years ago

I have a 18 year old Apollo Fanfare bolier. Every now and again , the pilot light goes out and I have difficulty in reigniting it. It currently will not light. I have checked the small circuit board that contains the component that "clicks" and whilst it repeatedly clicks , it will not...

cheers for all your help buddy

I cuurently have a single round basin in my kitchen. Underneath , it looks like 40mm (could be 32 mm) pipe with a single waste inlet - which is being used by the dishwasher. I want to add a washing machine hence the 2nd outlet that I require.

[/url] Sorry to be a pain but can you confirm what the item is actually called , so that I can look in the correct section on their website.

Do plumbers merchants and/or B7Q do them ? I dont know where there is a mcalpine near me

Can I get such a thing for under the sink, to accomodate the waste pipes coming for a washing machine and a dishwasher ? I can only find single ones

OK guys cheers.

Yes but do you know if he is LEGALLY obliged to have left paperwork with me if he is CORGI registered ?