Search results

If I go into the app, will it show me the model number?

Hi, it is mounted on the tiles in the kitchen. It does have its cover on it. The receiver is the v3+ kit. Does that make sense or you need more info?

Hi Thanks so much for your reply. The pump is a cheap pump i bought from Toolstation around 12yrs ago. I have put tado into a few places and never had this issue before. Snubbed circuit, will need to look that one up.

The receiver is in a kitchen and I don't want to have to run external cables from it to a relay somehow if that makes sense.

Hi. Thanks for the reply. Please see another video attached. I woukd like to install the relay in the airing cupboard with the wiring centre if possible. They have not told me which relay I need. I assume the brown and blue leads are just the neutral and live? Thanks for the reply.

Hi. I hope you are all well. I have installed a Tado v3+ receiver in my house for just over 1year. Around 3 weeks ago, the heating would just stay on always without any demand. As this was under warranty, tado sent a replacement and after 3 weeks it has done the same. The relay has fused...

Hi. Sorry to keep pestering. Could you advise which drill bits and length you use as struggling to find decent length drill bits that mention cutting into steel. Thank-you

Thank you

Thanks for the reply and advice. Got to be a long reach pilot bit though. Do you know what thickness you use as I have drilled out the threads before trying to drill the screw heads off! Again, 5hanks for the reply and advice

Oh, and if you wouldn't mind, it would be good to know the bits you use in the impact driver as well as the impact driver is a great tool for getting tough screws out a

Hi. Can you tell me what size drill bit you use to drill out the screws as I have one where the screws have rusted and I cannot get them to budge. So need to drill them out. Also, can you recommend some nice long length screw drivers as I am in need of a new set. Thanks

Thanks Ian. Good to know. In no rush to replace it.

Thank you for clarifying this. Appreciate it.

I see. Just to the live then at the boiler

Electric unvented cylinder.

Hi all. I hope you are all well. I want to wire a wireless room thermostat to a old ideal classic boiler which just serves central heating. It has a single channel programmer which switches on the boiler. No zone valve fitted. I believe I just run the heating on wire from the programmer (it must...

Totally understand. Thanks for your patience Muggles. Think I can actually take the brown from the valve with the live to the pump to pump connection as in the picture and then switch live from boiler 1 connection to switch live in wiring centre. No need for grey and orange wires from the valve.

Hey, I see most of the other ufh wiring centres are able to take a second zone valve bit I am thinking this one doesn't? Do you think the links that are shower from power to pump 2 and boiler 1 are already there? Think I must be over thinking this...

Really confusing these ufh wiring centre aren't they.

Doh! Missed the orange from the valve. That make sense?