Search results

Thanks Adam Its a problem in work, the lads have had a kitchen fitted (for their own use) and the plumbing is leaking from the soldered joints and the tap unions, really quite pathetic. There is water trickling down the wall to the fused spares under the sink which connect to the hot...

Hi What if any is the law on putting sockets on a wall in a cupboard under a sink.below the taps

Thanks for that. Would it help if you knew that the handle was on the left? ++++++++++++++++++++++++++++++ Seriously - point taken. I have asked the seller for the weight but he doesn't have a scale that will take the weight! I'll just have to hope that the courier will give a bit of...

Can anyone tell me a rough weight, including the glass, for a UPVC front door including frame. The door is glazed at the top, a letter box 2/3 of the way down and the bottom third is also glazed. I've bought the door and need to tell the courier how much it weighs but haven't a clue. Any...

Hi Since I posted the initial post I have had a spell in hospital so I am now back to this problem, I have been to plumb centre but they were no help, after spending about 45 minutes in there I came away with no answers at all. Does antone have the name of a good plumbers merchant in...

thanks all, will go to plumbcenter and see what they have. will let you know the outcome

Thanks Kev It has to be easier than renewing the soil stack.

Hi I am putting a macerator unit in for a downstairs toilet, I need to get into the soil pipe and wondered if it is possible to drill the cast pipe so I can put a boss stap on with a 32mm insert for the saniflo waste. If the cast can be drilled, will ordinary drill bits...

how do I safely extend the ring that goes into the first socket in the line so that I can move that socket four feet up the wall, I assume I cannot use normal blocks. Do I need a Junction box? if so what amp. Not sure you will be able to undersatand this, but hope someone can.

Hi Ineed to move two sockets about 4 feet from there present position, The ring comes through the wall into one socket out and into FCU then up to a second FCU then back through the original wall. how do I safely extend the ring that goes into the first socket in the...

Hey Plugwash spot on m8 that will do fine. Regards Kenny :D

Hi Breezer but if I need to go to two different wall units on two different walls exp: one wall unit left of the socket and the other wall unit right of the same socket, ( does that make any sense m8) Regards

Hi New here and need bit of advice, Can I plug in to a wall socket with a 5 amp plug and then go into a fused spare, then take two cables from the fused spare one to each kitchen unit light, if this is possible do I need 1.0m cable or will the cable supplied with the light units...