Search results

Hello The roof lantern is rated at u value of 1.0 but would take that value with a pinch of salt. The orangery itself only has one outside wall which is filled with kingspan. Other three walls are all brick which has kingspan inside. Water temperature is 45deg coming from existing manifold

Hi Dan, What other information do you need? Orangery is 4.8x3.7mtrs with roof lantern measuring 3.8x2.7mtrs 100mm kingspan on top of concrete floor

hi guys, underfloor heating in my orangery.. 20m2 floor area. can anyone recommend pipe spacing? 200mm/150mm or 100mm?

Hi mate thanks for your replies I checked the posi beam but one end is up the other end down so don't see how both ends can finish up? I understand the points you made reference the tiles and will give a few local roofers a ring and see what they say but what you say makes perfect sense.

Hi Guys, I have had a flat roof installed to go in between an existing pitched roof and a flat roof. Its going to be an orangery room. Its been somewhat of a challenge to say the least. As it stands now the orangery flat roof is on and water tight and their is a 300mm up stand of fibreglass...

hi again- i had a look today but definately can't seem to find any relays on that board. is the relay defiantly on the PCB

Thanks for your help :)

Wonder if it's worth me having a go at replacing the relay? Is it within the board itself? I imagine having a power cut a few weeks ago maybe caused it.

It's a 2006 greenstar 35cdi It's been a pain to diagnose because I never noticed it creeping up from 60 to 90 as the boiler was always silent when it did it! Wonder what caused that to happen on pcb

OK guys- new problem lol... My boiler is working fine- call for heating works, boiler turns on, heats the water up and pumps away until satisfied etc... But I have noticed that for some reason while working away whilst giving CH it will randomly stop heating but what is even more strange...

Hey Guys, Spoke to Worcester this morning- seems as if the PCB is gone. *Sigh*. Bloody electrics.

It's as if once heating has been on it turns off and won't come on again until a reboot. Is it worth a reset from the engineer menu?

Thank you Would all the hot water and rads get warm even if the pump is jammed?

Hi Gents, OK I have an update. I have checked the programmer and when it clicks on power is present on the FR terminals inside the boiler control panel. I also went into the engineer menu to look for the last fault code which was E9. I researched E9 and it shows as "overheating". The...

hi guys noticed the other day that hot water seems to work fine but boiler will not respond to call for CH. when i click for ch i hear the diverter valve moves and what sounds like a relay clicking but no heat and burner doesnt seem to fire. if i restart boiler a few times it works ok after...

Hello guys, I got an underfloor heating system which is heating up half the house and we are going to add a new orangery which I want to add underfloor heating to. My existing manifold is already almost full with only the space for 1 loop but I would probably need at least 2 for the orangery...