Search results

There is a socket lower down the same wall

Hi, I received a wooden 3D world map for my birthday, it is fixed to the wall by double sided tape which makes it stand about 5mm from the wall, I have used the LED lighting strips in the past and technically these would fit behind but the connectors etc are more bulky than the strip so won’t...

Hi, I ordered the following tape to seal my backerboards but it isn't a tape, how it it applied please? I was expecting something that had a back that peeled off. Not putting tiles on the board I am using shower panels. Thermopanel Waterproof Anti-mould...

Hello, We bought a new mixer tap from Mano Mano, never heard of the brand before. It leaks a little from underneath, it’s definitely fresh water that’s leaking and looking from underneath the counter it comes from the actual tap when it’s being used. The tap came assembled I just fitted it then...

Top metal bit that pokes through is siliconed but didn't come with any rubber. Bottom bit does have rubber, does this also need siliconing? Ta

Missus now thinks I am a plumber…. Anyway, removed the old sink, fitted this new jobbie, leaks out of the drain holes. Should the metal bits that are seen from the sink have rubber bits on them please? Mine didn’t come with any but did for the plastic bits underneath that connect to it so I...

Hi all, I purchased an extractor fan that has a sensor in it for moisture, not quite decided where to fit it in my bathroom yet as it’s still work in progress, I want to trial it temp in my other bathroom, can I wire a plug to it and test it in there after a shower when it’s steamy under full...

Hi, I have installed Thermopanel backer boards in my shower area and now ready to fit the shower wall panels on, what tape do I need for the backer board joints please? Thanks.

Hiya, what tape product do I need for the joins please?

Hi. Update. Ran some 1.5 twin and earth from the junction box to a 3amp fused switch then tested the end of the cable and got 240ish, what should be done with the none required earth at the fan end please? Was planning on earth sheave and a single connector block?

Hi, yes bathroom is above the kitchen, currently the bathroom floor is chipboard which I need to remove all the old grout from, hoping to use the cement boards instead of 6mm ply to level it and provide a sound platform for the click flooring.

So are cement boards OK on the floor under the vinyl click please? My boards are a little flexible with foam type stuff on one side and the harder surface on the other. Ta

Just a thought, I should fit a switch to this in the loft. What type of switch is acceptable please?

Sorry, here you go

Hi, are these backer boards suitable for fixing to my now bare stud work (plasterboard removed) for fixing the shower wall panels to please? Click meeeee

Yep, I can sort that, thanks all

I’ve found a better looking one lower down the wall which I will use instead of the other, I will leave that one be. I have bought some twin and earth 1.5mm cable which I will attach to the unction box and then up through to the loft and into the new fan, does this sound like a plan please...

Humidity sensor

I will tidy that up and whack a maintenance free box on. I should only need a live and neutral from here as I am not wiring to the light switch and the fan has a sensor on thatvwill turn it on and off. Is my plan sound please?

Yea, looks shoddy don’t it, this is how it was hiding behind the wall, probably from new build in 1995