Search results

We have a 2003 toyota corolla verso which has developed a fault with the Central locking Upon unlocking the car,it locks itself again straight away,and it then sounds like its trying to lock/unlock reapeatedly At the moment I've pulled the fuse and unlock manually,but I'd like to get it...

H3 is dhw sensor open curcuit or shorted,make double sure its piped up right way round as some (especially if its a warmfront install) werent.Remove the sensor,and youll get flooded. Although all should have been rectified by now.

If the opinion is that is my only option to eliminate certain parts of the circuit,from the procedure outlined earlier,I think I will have to get someone in who knows what they are doing. I wondered if there were any more checks I could do myself,but my thread seemed to have got hijacked. Many...

Now the we have got that sorted out,any more thoughts on my original,and still existing problem?

No, done that early on still tripping,looks like ill have to get my Sparky mate round in the new year. I was wondering if there was any way I could run temporary cables to by pass the sections of wiring I can't get at under the floor,all the cables emerge as surface run in the cellar,so are are...

I am as certain that I can be that there is nothing else connected to the circuit all my kitchen appliances are now running off extension leads from elsewhere,outside light,garage,etc etc all fed from other circuits

It sounds a bit more involved than I thought,I was thinking I could split the circuit and see if it trips again. It is on a ring,I'm a plumber,so tend to think of a flow and return situation,I know where the cables run,having done most of the donkey work myself when I fitted the kitchen(15...

All visible wiring looks ok,all wires are secure in the switch plates can't find any obvious faults. Can I disconnect and separate the wiring from one of the switchplates roughly half way round the kitchen effectively cutting the circuit in half,and see what happens then,or doesn't it work like...

Everything in the kitchen is unplugged,the boiler and heating is fed from the airing cupboard upstairs and is still working ok. The freezer is in the garage and is on a separate circuit. I think tomorrow,I'll check all the switchplates for iffy connections. Most of the wiring is surface run...

Hi all, I have a problem with my consumer unit tripping out.Typically,it started Xmas eve I've narrowed it down to the kitchen circuit, when I try to turn the kitchen switch back on, the main switch will trip. I have disconnected everything in the kitchen from all plug sockets including...

Oh what fond memories,I haven't seen that view for 18 months since I left Warmsure.

Why hasn't the installer explained all this to you?

Or in other words you're probably better off staying where you are now

Are you aready Plumbing but not working on gas?

Still cant see any pictures.

Still cant see any photos

Its quite easy with these boilers simply to unplug everything from the pcb,and plug it back in again until the problem occurs,usually pump,possibly fan,or diverter cartridge leaking and dripping onto the molex connector to actuator. PCB,doesnt usually blow the fuse in the spur.

Try stopping and starting the pump,also what ive done before in similar circumstances,is to put a hose on a drain off on one of the rads fed by the up and over pipework,stick the hose out the door,open the drain off fully,and let the water run out,hopefully the air will be forced out with it,you...

If all else fails,Ozzy,my cat will be happy to help,he takes no Prisoners

Nice how people assume they are being ripped off by plumbers,but don't question solicitors,estate agents etc etc fees.