Search results

what do you use to fill the expansion joints after you have taken the spacers out from the sides? 10mm gap ok to fill with cork strips?

how do you drain/but more to the point refill a central heating system is it the braided pipe under the boiler to refill?

wish to fit new radiator in bathroom is it ok to cap of the existing pipes to the radiator while i tile behind? will the central heating still work properly with one rad less? the rad in the bathroom is the one you cannot adjust the temp.

just fitting a new bathroom on pulling back the carpet around the toilet noticed it to be wet/soaking into the chipboard it smells like water really. is this condensation? can it be cured?

how do i check the outside thread for size?

opening a new distribution centre in gloucester. gloucestershire echo 1/12/4 job section

fitting a new bathroom.what is the difference between flexible tap tails 12MM X 15MM flexible tap tails 10MM X 15MM as these both have an 8mm bore.

i drilled a 125 dia hole in my kitchen using a core drill hired for about £50 for the weekend it was all over in 20 mins the hole that is

how am i going to hold the tiles in position when i tile on the underside of the window reveal

is it only me thats cuts tiles outside i.e. driveway water not a problem,.

looks like window fitters fillet/beading to me have you tried your local window fitters/d glazing yard?

hi the flooring in my bathroom squeaks and groans like mad., we have sheets of tongue and grooved chipboard nailed down,seems to be worst where the tongue meets the groove (the noise). any ideas to solve this problem?

the talk of council houses makes me steam., its the only way i could afford my speedboat/land cruiser.

just been fitting a new waste to bath,waste broke out came water soaked plasterboard ceiling.,;' what can i do to make the plasterboard stable again,can i get a sealing paint or just emulsion over it?

whats the ratio of tiles i can put on to plasterboard/plywood. is there a formula of so many tiles/weight per metre?

will the bathroom paint stick to pva after it has dried? bit scared when it comes to plastering'''' but not worried when it comes to patching a wall after tile removal etc.

so looks like i can get away with sealing the plasterboard and then painting with the bathrooom type paint(not keen on artex). pva is this any good or a special sealer to accept paint?

want to put up some new plasterboard on the ceiling in the bathroom whats the best way to seal the plasterboard against damp/condensation without having it plastered?

contact your landline provider bt e.g. and ask them to put a premium rate block on your phone problem solved cannot dial out with blocker,.;

i want to put up plasterboard over the existing plasterboard in the bathroom(not keen on plastering over the artex). do you know how to seal the plasterboard to make it stable to be painted after(not keen on plastering.artex).