Search results

well hopefully there wont be massive amounts of oil leaking out of it or i have a problem.

what questions?

:)

oftec, risk assessment has been done and single skin can be used, plinth has been made and will be painted with bundcoat resin before tank is placed on it, then at a later date i can build a bund.

For clarity, i dont NEED a bunded tank,bund is just for piece of mind in case the worst was to happen it would catch the oil.

"ffs" he says while replying to the thread himself.

why, if it didnt have a bund any leakage which there shouldnt be any would just get washed off the plinth so why would i collect it and dispose of differently?

Or i could just add a bit of 15mm pipe with ball valve to the lowest point through the wall to drain it.

I wouldn't say cheaper, bunded tank is about £600 more.

That what I was planning doing, hence searching bund in the forum.

im aware that this is a very old thread but i laughed when i came across this.

oil tank

Hi, there is an issue with the lights in our corridor that has been present since buying the house some time ago.There are 3 lights and 3 switches, the problem is that the 1st switch needs to be on for the others to work, and if you switch it off at either of the other switches the 1st light...

Is this the sort of thing https://m.ebay.co.uk/itm/Rempro-400ml-DPC-Damp-Proofing-Cream-Rising-Damp-Injection-Treatment-Control-/132334205123?nav=SEARCH&varId=431660255163

Cheers mate, that was the sort of thing that I was planning getting for the damp proof course, so I'll just leave the sbr out of the mortar, ta.

The joints need redone as they have been wet so long they have turned to sand, when I redo them if I am going to do a chemical damp proof course should I put sbr in the mortar, will it stop the damp proof course creeping?

Suppose the other option is to just tank the inside with tanking slurry about a meter up along that wall.

Well after drying out the floor it has become obvious that it is the wall its coming in, just need to wait for a dry weekend to hack the old render off at the bottom and put some new on with sbr in then paint it with blackjack dpm. Right at the back you can see in the first 2 photos i posted...