Search results

So what would be the (easiest/most inexpensive) solution? I am yet to bond and tile over the mixer so its not too late to change the mixer. Im a little peeved that the manufacturer states "all water systems"! Could I add a pump to the hot outlet from the cylinder so its pressure matches that...

Hi all! I have just installed a new mixer shower in my house. It has a twin outlet, one at waist height for the normal shower head, and another above head height for the fixed head outlet. I have a mixed system (gravity hot, mains cold). The pressure from the mains is very good, the pressure...

Need a couple of extra details to help you out with a ***ball park **** figure. How many floors are above the walls your taking out? Are you happy to have the beams on show (rather than hidden in the ceiling void?)

In all seriousness, would you suggest that it's the pcb?

It must be the cold from no heating that has sapped my sense of humour!

very helpful both of you....

Bobby21 do they have a website do you know? Are their prices much cheaper than the new ones??

Kingspan is approx 3x as efficient as Rockwool for thermal insulation - so 100mm works as well as 300mm of rockwool. Acoustically it is no better - in fact in my opinion rockwool is better because it packs in better, and also the way it is made up is, from a physics point of view, much more...

Am i reading this right that the void your refering to is between the downstairs (heated) and the conversion upstairs (also heated)?

He seemed uncertain, but did suggest it could possibly be the PCB. He couldnt find any faults with the fan, etc. My reason for posting on here is to get a second opinion before buying the inexplicably expensive PCB replacement - its £160 for the PCB and only £450 for a complete replacement!!

I have a Ferroli HE-260-C Boiler. 2 days ago (immediately after changing the CH settings) the boiler started showing fault F05 ("Fume pressure switch fault and/or Fan fault"). I had a Gas Safe Engineer out who looked at the probable causes, at which point fault A02 flashed up ("Flame present...

yes, 100mm kingspan on the floor which will be joisted out and 60mm on the walls which will be 3x2 studwork all round

Hi all! I have a cellar in a victorian house which im planning on converting into living space (man-cave, games room, etc). There are no signs of damp anywhere in the whole room, but im still thinking a little extra protection wouldnt be a bad idea. As there are no signs of damp anywhere...

no sorry no solution... A plumber came to look at it and basically the whole thing was goosed. There were about 5 different parts which needed replacing and in the end i just went for a new boiler sorry!

wow really, that much more?? Im torn between the two now with that sort of price difference!!

nobody??

Hi all, I have a lime plastered plastered house, but the plaster has blown in one room on two walls. I have removed it completely back to exposed bricks (very rough and gappy i must add!) . My question is what approximately how much more expensive would lime rendering to match the existing...

well theres nothing in the base. I know water is getting pumped in and being pumped out because ive disconnected the waste pipe into a bucket and it expells the same amount of water every time i set the 5mins running! So yes it is able to drain and it is able to fill....?

ok will try that. Ive taken the casing off the bottom underneath the door and everything is dry. Whereabout would the water be coming out of?

I need help with my CDA dishwasher (model wc130) I set it to run, and it starts making the usual noises it used to make, sounds like water being pumped into the bottom of it. After about 2-3minutes this noise stops, and it all goes silent for about 30seconds, after which all the water...