Search results

I'll pop up and have a look but I did re lay insulation all along that edge . I'll see if there's a gap and fill it thanks

Also we don't dry clothes up there and have a window 1 myr to the side of it with trickle vents open

Hi, as its a corner wall connecting to the neighbours, I cant get behind it , I'd have to remove the eves , it's upstairs . Then I d have a fight to get insulation down due to wall ties etc. Thanks

Hi all. In 1 corner of 1 room which is adjoining to the neighbours, I get mould build up in the corner , it literally starts 1 inch down fron the top. I have re boarded the ceiling 4 weeks ago and painted, now this. It did happen hear in the past due to the drain pipe blocking up, the water...

Hi thanks It's only the gas meter that's moving. We are onky going as far forward as the stack pipe to keep costs down. I've had full quotes for all works that entail moving the gas meter to the front of the new extension. Thanks It looks like from reading everything it will need planning...

Thanks. When you say provided it meets , do you mean it would require planning permission? It's just when I read the side extension part, I'm under what it states size wise etc , I know it entails everything on the portal before this but I'm still unsure wether it's needed , What would be the...

Hi all I'm wondering wether this would require planning permission. It's a single storey side extension , 2.5 mtr x 7 mtr. Will house a downstairs toilet small utility and extend the dining room . Pic of house attached and what type of extension but no door at the front. Thanks all

Update!!! Fans working as it should be now, weird one. I'll keep an eye on it, see if it plays uo again

Thanks all

Hi , as I've just put I've tried the fan in each position using the isolator. Before all this , if the fan was on and I decided to override the timer I used to pull the pull string to off then switch the isolator off then back on . (Daughter forgetting) Thanks

I tried the pull switch in each position by isolating with the isolator and then powering on. Thanks

Murdo Everything I put in my 1st post hasn't been touched wiring wise apart from the fan so if you read it, it should all line up to the the fan from the isolator, brown all the way from l L1 to fans L neutral all the way form isolator to the fan N Black from L2 on isolator tothe pull...

Hi . I didnt swap the LS and L as it shows on the fan , this is a pic I found online. The brown is to L like this pic and black to LS, I'm sure they were this way when I disconnected.

Hi All Had an issue with extraction which was due to sags in the outlet pipe (condensation build up). Which leaked onto the ceiling etc. This is now sorted. Next issue I have an isolation switch outside the bathroom and a pull switch (fan only) inside. I turned off the main isolator and...

Yeah there the ones I used , can't fault them at all.

In the end I've gone for the the metal drywall anchors. 2 x 600 cupboards hung with them, and I can literally swing.off the cupboards . So all good

I did that but a change of units after cladding the wall means my batton is now an inch too high. The screw holes on the cabinet mounts are only 30mm sways from each other so grip its would.be too close .

Age old discussion What plasterboard fixing do People use now. For Ex: Hanging kitchen wall cabinets on plasterboard that cladded over so around 24mm thick . I used fischer duo but these ended up failing, so looking at the toggle or anchor type to re hang tomorrow. All be it it was only 1...

Hi its a 90 from toolstation https://www.toolstation.com/solvent-weld-bend-90/p47028

I could do but we were trying to maximize the space under the sink . I'll have a think