Search results

No problem. Its a pretty old house and i think their is 2 course's of red brick. If i fit on the outer brick wont that expose the cavity? What happens then?

So it is as simple as that? Lol Just looking for tips on the installation of the actual door. Where abouts do i fit the door? on the outer or inner course of brick? Back to the current plaster line? I understand it has to be plumb and square ect...just looking for tips on the not so...

Thanks foe your reply... The current window is roughly 1750w and 2050h. I dont think i need to cut anywhere as the bottom half of the window is roughly 1000 high with a flat panel and the window is ontop of this is fixed togehter by a coupler. I was thinking of just ripping this out and...

Hi guys, Moved into a house which has a full length window in the lounge to the floor with a flat panel accross the bottom half and the window ontop.Thinking of taking this out and replacing with pvc french doors. Any tips or pointers on how to install the french doors?? Thanks for your comments

The house is rcd protected but i need a light too. thats why i was thinking garage unit. No pipes in their yet, thats the next step....

Morning guys. Just bought a new house and need to get power to an outhouse literally 1m away from the house. All it needs is a double socket (to run a washing machine and tumble dryer) and striplight. Their is a double socket in the house on the outside wall which i wont be using. So i was...

Its a honeywell 2 channel programmer, not sure what model!? Its controling hot water and heating. I also noticed that theirs 2 x 0.75 (I think) flex coming from the controller into a JB then 2 x 2.5 flex running to the actual boiler! Is this ok? Or should it all be ran in the same size flex??

I'm not installing the caravan point now All I'm doing is extending the ring for each room and the extra sockets and the feed into the garage

Thanx for the advice guys, think ill take a feed from the house like I intended. When u say take a FCU for the light do you mean off the 2.5 and run 1.5 to the light? Or should I try extend from the lighting circuit in the house? I suppose either would work? Can you have 2way switching off a FCU...

I was thinking that cus their is a single socket at the top of the stairs which I can feed off into the garage through the wall (yes it is attatched) they have also requested a caravab hook up point in the garage, would that be too much load for the ring? Would I need to put a 3a fuse in the...

Thanks for the reply guys, the wiring in the house was not complicated so was able to extend the ring in each room no problem. Got another question now.. The garage (which is attatched to the house) has no electricity and needs a supply! What's the best way? Need a supply to a square d garage...

ill just find the ring (or radial) and extend it in each room

I was going to run the cable under the floor boards then up to the accessory behind the skirting into a channel to the sunk box

its an old council house with 2 doubles in the lounge and one double in each bedroom. The c/u is the old wylex with the fuse wire mcb's which I will change to the b type wylex. She just wants to add sockets in each room without having to chase up all the walls so I suggested adding a fcu or...

a family member has asked if I could possible do some work in the new house she is moving into. replacing socket and switch faces ect - but she has also asked if I could add sockets to each room. What is the best way of doing this?? for example there are 2 double sockets in her lounge and...