Search results

Hi I thinks its 5w250v on the fuse. Thanks

Thanks for your response..The transformer is this http://www.ebay.co.uk/itm/24V-Bar-Lighting-Transformer-Low-Voltage-Beer-Pump-/180812019997?pt=UK_BOI_Restaurant_RL&hash=item2a193c791d and the connection from this choc block back to the bar pump is like this thanks [/url]

Hi nijopo...As you look at the boiler where all the pipes go into it, The far right pipe has what looks like a screw top lid facing you..Turn the boiler off also turn all the heat return valves off..this will restrict how much water will come out..Once done, Get a bucket and unscrew the lid...

Not really house electrics but need some help. I have two beer pumps for my homebrew and they have internal pumps to dispense the beer..The problem is that there are 4 wires..Two (orange and purple ) power the light to the beer font.The other two are the pump but when I connected them to the...

Hi Tony..Got home tonight and rads still no good.......so thought sod it, lets look at the filter...One stupid little gaze tube that was caked up with **** ( did its job though to stop it going any further ) Cleaned, put back in , re pressurized and ........ bloody roasting rads all over the...

Hi Tony I did turn it further but it seemed to go back to the same position, will it keep turning until it stops....?Like srewing in a screw?I only did it this morning before leaving for work so wont know anymore until I get home tonight. I was going to look at the filter side of things...

Hi Tony First of all...really greatful for the advice your giving...The little white screw inside the CH capacity was at this angle when looking at it / I have turned it anti-clockwise to this - Hope that makes sence?Is that correct or should I be turning it more? Thanks Again

I have found something new tonight..the pipe next to my heating return which appears to be Cold water inlet when heatings running gets really hot, and when I turn on my bath cold tap ( the bathroom and bath is directly above were the boiler sits ) runs very hot for a few seconds ( like tap hot...

sorry to double post..bump :oops:

Hi Tony I think I may have located a manual on the net...Theres 4 round adjustment on the diagram:- K Adjustment Anti Fast Cycling Adjustment CH Capacity Ignition Capacity Also it states in the manual that:- " The boiler is fitted with inlet filters both on the cold water inlet...

Thanks for you response Tony...I'm able to build pcs etc so PCB's should be up my street..The PCB is in the front caseing flap but have no manual for the boiler so any heads up for what i'm looking for and adjusting would be a great help..Thanks

Hi Not to go on to much with full long winded version:- Problem 1: Radiators not getting hot all over the house Action Taken so far 1: Cleaned out all rads on the garden with hose till run clear and put back on ( quite a bit of black stuff as system had had fernox put though it but...

Thanks Agile...I want to drain the system, I have a drain tap on the dining room radiator near the front door..If i run a hose from that to the drain and open will that help..As its a combi boiler guessing it will need to be turn off/electric supply...Then when all water has stopped do I just...

From my boiler having same probs a year ago, Pressure raises when heat on, Over night or when not on for a length of time pressure drops off scale..It was my expansion vesal in the back of the boiler..Pumped it up and all was fine

Hi I have a Heatline c24 boiler ( please dont laugh ) I have been trying to balance the radiators so I get even heat to all..Its not going too bad but still have some way to go...The boiler when it gets to heat will cool down to the 60 on the display,fired up then heat to 80 ( takes about 13...

Hi To All All of my rads have a thermostat knob on them, One upstairs I think has been done the wrong way round...On all but this rad when the central heating is on the pipe going to the rad via the thermo knob is very hot..the other side if luke warm..The one upstairs the pipe going in via...

Thanks for the responses...Yes the boiler kicks in and out quite often..The pipes go straight up from the boiler under the bath then across the landing...All rads seem to have water flow out when bleed nut turned but the back bedroom one seems to have higher pressure to it??It has a flue to the...

Hi To All Yes I know these are crap boilers with lots of probs...I already know this,but with an old house with no central heating it was my cheapest quote for the full install...Anyway,My heatline boiler of recent has been not good,The hot water has been ok as long as you can get the tap to...

Sorry to post again :oops: 1 Last question to stop me frezzing my nuts off :lol: Untill i get the new parts new week. Can i start the boiler without the diverter switch attached to run just the rads ( no hot water )???Thanks

Bump....Please help :cry: