Search results

Hmmm, maybe ignore my last post, seems conduit may be made with a lot thinner walls these days! Stuff I used to play with had 1/82 walls.

As others have said get 3m lengths delivered, also get a suitable dia. sized length of all thread and tap the conduit where they join.

With the flow switch I showed, you would connect one lead of the flow switch to the switched side of your lighting and the other lead to the above the shower light fitting. If the lights aren't on it will never work. If the lights are on and you start the shower (get a flow) the above shower...

Micro bore shower??

That should be it. The 2 blacks together are the neutral loop and feed. The single black is your switched live and should have some red sleeving on it to show it isn't a neutral.

That would never happen. The plasterer should have skimmed the studs down a bit!!

Thats what I did, after advice on here. One of these: Don't know the longevity of this as it's reasonably new but does the job admirably.

4lb lump hammer???

I love the Wago connectors but in your particular circumstance I would be using an Appleby 4way 20amp MF box as Chri5 shows in his second picture.

Most likely. I once had to redo a re-wire in an old Toll House as I'd used flat t&e and not round cable (flex). Same as military housing should only be wired in armoured cable. Kipper houses in LSF.....

Are you replacing it? Proteus CU's are the worst things known to man after tights!!! :P

EEK!!! :shock:

I reckon its down to the "This is live, I'll make sure its tight, and this is neutral that takes the empty electrickey back, so its not important". If I get a call saying the showers suddenly stopped working I always take a new switch with me. I've yet to see one where, if the shower itself...

It is Sunday, and it is early so I'll let TTC off (but PBoD spotted it).

It doesn't need thinking about. Anybody with half a brain cell would realise its bloody obvious. Very true, never assume anything as far as electrical work goes. Sounds like the OP has already started down the "do something dangerous" route. Four year old grandson was helping Granda' change an...

I need about 12m of 10mm² T&E cable for a shower as the shower is rated at 11kw @230v and 11.5kw @ 240v, but everywhere I've asked for it says they only sell the round stuff. Anyone any idea where I can get some 10mm square T&E cable? I've got about 12m of square 6mm cable but I don't...

Moi? Sir, I wouldn't know where to look!! :P