Search results

as per the op - this cupboard takes a lot of weight. Just making sure,,,,,,,,

endecotp: Thanks for the link. I have looked at lots of 'specialist' suppliers, but so far to Noah Vale. I'll add an image here, because I think some readers are confused by me quest: All I want to do, is make sure I have the best screws for the job.

Hi, I'm putting new kitchen wall cupboards in my kitchen. The units came without corner brackets at the bottom, so I'm adding some. As one particular cupboards takes quite a bit of weight, I want to make sure I use the best screws for melamine / chipboard. Max length 16mm - bracket holes are...

Well, 1) Bulb has blown (25w T170) 2) Internal fuse blown (10A - 32mm). I suppose this might have been caused by leaving the door open,,,, anyway, gotta trying finding these items in west cornwall (it does have some good points !?) cheers F

Thanks for your help. The socket is a double one with the fridge in one & MW in the other. Just tried both - both o.k. It's been in the same place for years, never moved. I guess it's the case coming off tomorrow (I did have a few hours spare !?) Just off to hospital now, so todays...

Hiya, My MW just stopped working. It was fine at first, then no power, or light (fuse is ok.). I'm assuming (hoping) that the bulb has gone, so stops the main power ! Is anyone aware of whether this is so please ? Any idea what bulb this takes please ? I do tend to leave the door...

thanks again - I'll test that today & hopefully pick up one locally ?!

coooo,,,, I wish I'd known that when I was there. a) can the tco be tested in situ, or does it need isolating ? b) can it be replaced in situ, or do we need to strip it down ? c) are you Shower Doctor ? many thanks for you help.

Hi folks, My sons shower has stopped heating the water. I’ve checked power to the unit, which is alright. All the lights work as they should work. The water runs as it should. But no heat on any level. The element seems to be o.k, in that it isn’t shorted, and allows continuity. I’m...

Hi folks, My sons shower has stopped heating the water. I’ve checked power to the unit, which is alright. All the lights work as they should work. The water runs as it should. But no heat on any level. The element seems to be o.k, in that it isn’t shorted, and allows continuity. I’m...

I had multiple chats with Panasonic over the years, on different subjects. On this complaint they also told me that it was a fault of The Worlds flour season !!??##. I had no eyed deer, that the World was in turmoil over bread making (I guess it really wasn’t) Panasonic don't seem to...

Hi all, I have no idea which section to put this in, so if the MODs want to move it, that's o.k. I am wondering if anyone knows of works or maintenance being carried out on the German DCF mast please ? I know that maintenance is being carried out on the British MSF mast this month, &...

No need to apologise mate. I know you (along with others) take the time to help numpties like me, and I appreciate it. The info you gave helped tremendously - & I for one knows a lot more now. all the best - & thanks again.

cheers again Alan, Even I can use a ruler,,,,, as long as I have the items on hand to measure :wink: I needed to know what to ask for when buying blind. When I was working, I used RJ11's (excuse the wrong vernacular [although it may have been correct in my work - CCTV etc] but for this...

What about the physical sizes ? How do we differentiate between sizes ?

Thanks guys, I already have 4P4C connectors (& crimpers), but they are too big for this application, hence my - wrong - terminology of RJ11. I still can't find the difference between sizes (oooops 'RJ') 9 & 10. It looks like I'll just get a replacement lead in the end, but I'd still...

I volunteered to put an RJ type plug on an elderly neighbours telephone handset line. When I got it, the plugs are smaller than I'm used to. They are 4/4 and a tad over 7mm wide. I thought they might be RJ10,,, until I saw RJ9 in the mix. After an hour or so of searching, I can't find...

UPDATE: It is definitely that bottom hose that's leaking. There is no 'clip' or 'clamp' holding it onto the drum, but there does appear to be some sort of sealant,,,,,, unless it's just gunk ! If so, is it a specific sealant for the job ? If so, any idea what it is please ? Some of...