Search results

Trying to figure out the correct wiring for this up/down config

Ok so the switched live (black but should be sleeved red) and the two reds next to it in the centre all into the same terminal block (not attached to anything). Then the remaining two blacks both into the neutral connector of fitting and the remaining red into the live connector of fitting...

I have a three gang switch down and a two gang up. I've tried to show to the best of my ability what happens, but if there is a better way to represent it please let me know and I will redo it. As far as I can see switch one downstairs has no effect (there are security lights outside the door...

Thank you so much to both of you - I really appreciate you taking the time. The annotated picture was especially useful. I'm planning to connect the three circled reds into a terminal block and wrap it with insulation tape. Then connect the switched live black should be red sleeved to live...

I was wondering if someone could help me understand the wiring arrangement in the picture. I've looked on the wiki about ceiling roses and modern lights. I think I need to put a new junction box in the loft above the rose that replicates the wiring arrangement and then feed a single new three...

Trying to work out the configuration to replicate in new junction box above.

The flats I live in have two units per floor. Each floor is entered by opening a large sliding fire door. This door is timber framed with fire safety glass in the middle. The problem is that the door slams into the frame when it is released because it is on some sort of weighted chain closure...

I live in a recently refurbished flat - about 80M2. Everything has been done to a high standard apart from the flooring, which is a floating laminate (no glue/nails) over a suspended timber floor. I'd like to upgrade the flooring, and I would like to know if there are any options which...

I have the above boiler in a 2 bed flat with 5 Rads all with TRVs apart from the rad in the bathroom. There is no room thermostat attached to this combi. I still have loud noise from the largest rads as the TRVs shut down, but the pump still pushes the water through the system. I thought with...

This is what is happening in my system with a Alpha HE CB25/33 Could someone offer a solution to the noise problem? Thanks

Hi there, I'm having about 30m2 of 15mm bamboo fitted as a floating floor, using 5mm fibreboard as an underlay. Two or three areas of the floor are pretty uneven I think with some loose floorboards (its the 1st floor). My fitter is a reall professional guy, and has been really helpful...