Search results

Sorry for late reply but I am in the middle of a summer house build so This gets bumped down. I have ordered a new fuel pipe with correct filter so will try that , along with your other suggestions and report back

Not sure but I losened off the filler cap, the filter is the wrong type, would hope there is no rust as its a plastic tank lol

Roof boards and epdm installed already. ( plus I dont really understand what you mean- sorry) Really All I want to know is: A: if I need to leave a ventilation gap as its a wooden shiplap construction so its not exactly airtight. If I do Does it matter which of my options in my original post...

cladding along the underside and the front facing vertical

Many thanks for the reply John I will check all that tomorrow. I did think that the brass screw only took 11 turns from fully in before it fell out!! but I will check. Do you want pics of old carb or new one? (old one may well be an ebay special ) the new one is...

Hi all I have had the above lawnmower for 7 years now and it seems that every year I get a problem with it. This year its the return of the problem; runs when primed for a few seconds but then stops. After looking at various posts and fiddling I realised i had lost the brass jet. So I bought...

Bit confused, as i want the joists hidden ( there will be wiring in between them)

Excellent, I love it when people confirm that I am right. Being married it doesnt happen very often !!!

Hi all The (external) build for my summerhouse is nearly complete and I am looking to move the build to the interior including insulation. The summerhouse is of similar design to the one in the picture ( apologies to the original poster whose photo this is, hope you dont mind me borrowing it)...

All fitted now. The door will be slightly recessed from the cladding but I will use edging trim to tidy/seal the "join" Thanks all

The cladding is wooden tongue and groove. No, not fitted the battens or cladding yet. Wanted to sort out the door 1st

Hi All I am building a summer house and have bought a some secondhand double glazed patio doors. The frame of the summerhouse is made of 4X2 (95mm x 45mm) on the outside it has 11mm osb sheathing, tyvek, 25mm batten and finished off with 16mm (finished) cladding. On the inside will jut be 16mm...

well the ap was just hanging from a screw on the wall for testing purposes. its the ac-m pro so no antennavisible

The office is being built so i stood on the base lol No there is no wall but there are some trees that narrow the garden and then some trellis, and I guess the office will block the "route" to the summer house when its built. If its omni directional maybe I will try it on the office when its built

Well I have done a bit of experimenting today. Hung it on the kitchen wall. 1st cable to the switch is a 15m cat5 (not e) named the new wifi test ( as you do) sat on the patio and got 285mbs Moved to where the office (about 15m away) and it dropped to 85mbs Moved to the summerhouse and the...

Thanks all. I have bought a little 4 way switch that I will install in the kitchen Then using the poe injector I will try the wap on the kitchen wall and see how far it reaches. ( should be fine as its range is 180m my garden is 40m) If it doesnt reach then when I wire up the office I will try...

So a bit of an update. I have bought some external cat 6, connectors etc and I won an ebay bid on an Ubiquity Uap-ac-m-pro This comes with an injector so I could just buy a cheap switch ( was thinking TPlink) So I can see the range is huge (180m) but does anyone know the angle of output? I...

Hi All I am build a shed and a summer house that will be built seperately but joined together. Due to work stuff I thought it would be easier to build my little shed ( 1.5m wide 2.4m depth) 1st as one structure ( I am talking walls osb sheathing, tyvek and battens) Then when I have more time (...

All bought now- went for classic bond 1.2mm epdm thanks for all the help

Sorry to keep going off on tangents. So the tyvek is bought, the epdm is bought and I have accepted the need to sheath the shed. I am awaiting prices but it looks like osb is the way to go, and it looks like 11mm is only £1-2 more per sheet so I will probably go with that. So the next niggle I...