Search results

6.6kW @ 240V is 27.5Amps

Is it a rewireable fuse? Are you sure it is 4mm². That would be most unusual.

You could have a usb socket but not on a normal electrical socket (in a usual sized UK bathroom). You seem to have bought something unsuitable for your needs.

It won't draw that much when all the elements are cycling off and on (more off than on). The formula we use to calculate the diversity is - 10000 / 240 = 41.66A (the 6mm² can handle that anyway) 41.66 - 10 = 31.66 x 0,3 = 9.5 + 10 = 19.5A. The circuit could handle 20kW.

A 'cooker' includes a hob and an oven. That's why the circuit is called a 'cooker circuit'.

Yes. Perfectly normal.

And stop using a hammer to make holes in the cabinet back.

Who wrote that? ...nor written by anyone with any authority. My point is that: The size of main bonding conductors was raised to 10mm² because the DNOs failed to maintain their cables properly so that the main bonding conductor might have to conduct high current in the event of a fault. If...

:unsure:

I don't think that is correct. After all how would it ever be damaged by heat until it was needed? It is something that should be corrected when work is carried out.

...

I still think that is part of the thermostat internal wiring. There aren't any coloured diagrams. I only added "Red" because that is the colour used by the OP to terminal 3. Still can't see any blue sleeving.

Amended: NO Live - Red - 3 Sunvic to 1 Honeywell NC - Blue - 1 Sunvic to 3 Honeywell - if needed. NO - Yellow - 2 Sunvic to 4 Honeywell

Now I have posted that diagram, I think Eric was right. I will amend my previous post.

That doesn't make sense. I don't see any blue sleeving. I think that red is part of the thermostat. It is this diagram: but terminal 3 is Live - Red - in all the diagrams

If the NC is not needed then the wiring could be rearranged at the other end of the cable to include Neutral.

NO Live - Red - 3 Sunvic to 1 Honeywell NC - Blue - 1 Sunvic to 3 Honeywell - if needed. NO - Yellow - 2 Sunvic to 4 Honeywell

Get separate stand-alone PIR sensor.

Do you mean it had two wires from the meter to the main earth terminal?

Another? :unsure: Clearly nonsense on both parts. Are they not more efficient than traditional hobs? Doesn't that mean they use LESS power? So why would they need MORE? Even IF there were no DF on an induction hob, why would 10mm² be required?