Search results

Thank you for reply. I'll see what spanner access there is when it's cold. Are they tight to get out because of scale? (I'm in a soft water area.) And do you use anything on the threads on the new one? I'm a bit twitchy now but if I do it, I'll make sure everything's water protected. I assume I...

I want to change the three automatic air vents on my Grant Vortex 26e oil burner, as all are leaking to some degree. I'm thinking of keeping it off for a couple of days so dead cool, reducing pressure and shutting off the blue isolating valve and cold inlet at back, then diving in. Any thoughts...

I'm no plumber but I think it'll be fine. However, the gap around waste does seem a bit wonky.

Good call! Thank you. :-)

My 'inner' light switch turns on the 'outer' light and vice versa, so it's intuitively wrong. I guess it's a case of just swapping top and bottom load connections, but is it L1 and L2 or L1 or L3, or something else!? Thanks in advance!

Light fittings

Amazon. I understand that they must be a bit naff, which you don't find out until you get them (and have disposed of the packaging the day before on the tip run!), so I'm just trying to make the best job of it. They're not replying to messages either... ;)

Yes, cable's wired to light fitting and no markings anywhere.

Just two core cable from the bulb fitting which can be cut to suit the 'drop' of the lamp.

Nothing. Quite surprised really. :-( Wifey's bought three of them!

I've some hall lights to fit, with live and neutral only. They don't indicate they're double insulated. Should I connect an eyelight on the existing earth (which is blanked off in the old plastic bayonet terminal block) and attach to the new metal bayonet's ceiling fitting screw? Or just blank...

Hi again Sitting room lighting circuit. And I'm sort of leaning toward sticking new units on the bases, or just replace the whole thing like with like and ditching the RF ones. One thing, had a little look on fleabay and there are loads of the bases for sale (just the base). Why would people...

Maybe that's the answer? And ditch the RF ones. I wonder why they were not used...

Hallway, dining room and sitting room, and no extensions built. There's also another battery only one at end of hallway!

Not easily. The hallway, where both are, is the only bit of loft all tongued and grooved. The 'sitting room' trip turns them off.

Not long moved in and currently decorating. We have two smoke alarm bases in the hallway, now redundant as previous occupier installed battery only rf smoke alarms. These bases are currently live. Can I just maintain their connections and poke wires into ceiling (it's a bungalow, but this bit is...

Yes and maybe! Plus you can try the brackets in both positions now. Edit to say push the valves out towards the centre of the room!

Had the same issue. You can buy 15mm to 1/2BSP converters which'll push out the valve.

Thank you. It's very tight to wall, though, to get an Allen key in. Does turning the nut on the stud do the same thing? Or does the bottom part of the hinge (the white half) come off to reveal some other adjustments? It seems part of the hinge itself. :-(