Search results

  1. KenGMac

    Bulges and cracks on internal walls

    DAW, good evening, again. Quick no mess check??? use a magnet Ken.
  2. KenGMac

    Bulges and cracks on internal walls

    DAW, good evening. Are any of these bulges on opposite sides of the same wall? And are all the bulges [about] the same height from floor level? In the image posted, the one with the plaster removed, it appears that there is an old metal pipe or similar embedded in the wall? if so the metal...
  3. KenGMac

    Internal vent pipe insulation

    sotal, good evening. Is there any access to he open top end of the pipe box in the loft space? If so you may consider pouring Polystyrene beads into the opening? if done as a fast trickle, the beads will fill all available space around the pipe. Now and again, tap the pipe box below, a shoot...
  4. KenGMac

    Poor Service (plumber left leaks)

    KJT95, good evening. Does your Plumber have a Facebook page? Contact him that way asking him to return, If still no visit then just leave a load of messages on his Facebook page??
  5. KenGMac

    Cracked Render

    Allan Baxter, good evening. Can I ask how wide atr these cracks? Ken.
  6. KenGMac

    COP26

    Westminster decided to "drop" this talking shop on Glasgow. and were even magnanimous enough to give the host countries first minister a "bit part" to host a secondary "event" Westminster told attending [probably the 3,000] delegates on the [then] Red list who would have to isolate that the...
  7. KenGMac

    Passenger Location Cock-up

    All this just to fly from England to Scotland?
  8. KenGMac

    Leak

    Tmon, good evening. Suggest that if possible get the person who is coming along to look @ the roof and chimney to take a LOAD of images?? Then post some on this site and see what replies you get. Ken.
  9. KenGMac

    Drainage and tree roots

    electrogear, good evening. Over time possibly? all depends on the Vigor of the root systems, their water demand, and because the ground has been disturbed, it tends to act as an underground wet/ damp area. Sorry but there is no real meaningful answer to your question. As an aside, is the...
  10. KenGMac

    Heat pumps........yeah right !

    I wonder if [someone] has extrapolated Electricity demand for [say] 1/. Heat pumps. 2/. Charging ALL vehicles, Trucks, Trains, all the public transport, and every private car. 3/. Supply to homes. 4/. Industry needs, rather pay electrical cost for a Bessemer Converter for one second never mind...
  11. KenGMac

    Getting old paint off of plaster

    oscarthecat91, good evening. Suggest you look @ a "Pole Sander" https://www.amazon.co.uk/pole-sander/s?k=pole+sander And use a fairly rough paper ??? or try a few different grades and see which is best. At the end of a shift no need to go to the Gym that day??? Ken
  12. KenGMac

    Grey epoxy grout going a bit yellow

    Mr Chibs, good evening. Could be that shampoo and soap, or their residuals are the cause of the issue?? One easy [cheap] cleaning option could be ??? get some Cillit Bang the black mould and mildew version and have a go with that? Ken
  13. KenGMac

    What to do with our wall?

    macoadh, good evening. Looks as if the main wall is oF solid construction, no cavity. Is that an old unused chimney ? Suggest you try to have a good look at the cap on the top of the [chimney?] and is there a vent at the vase of the [Chimney?] There appears to be an air brick vent that [in...
  14. KenGMac

    Dripping Tap-stripped grub screw

    Check out "Helicoil" A replacement threading system for such situations Ken.
  15. KenGMac

    Discolouration on new steel bath

    You can if you want to go back to the supplier and say [something like] it has only happened when the bath was in use?? Just a consideration. Ken.
  16. KenGMac

    Discolouration on new steel bath

    mxo, good evening. Could be?? Rust??? or an imperfection in the applied top finish. If it were me, I would be going back to the supplier or Contractor that installed it to request a replacement. Is the dis coloured area raised in any way? Ken.
  17. KenGMac

    Damage to flat, repair feels potentially poor. Any advice?

    The "internal Structure" appears to be damp / wet causing surface staining. Were De-humidifiers and air blowers used? and I mean large 1.0.m3 bits of kit that are really noisy, say 3 or 4 air movers and at least two BIG De-Hums ?? and for how long?? If it is an Insurance claim ??? contact...
  18. KenGMac

    Damp proofing

    Was the property left vacant for any length of time prior to the purchase?? If so any unheated and un ventilated space can and will attraact dampness in some form. Ken
  19. KenGMac

    Fire Sprinkler System

    If you are going down that route, suggest you look at Mist Fire Suppression, uses less water and thus causes less water damage if triggered. Ken
  20. KenGMac

    Gravel between floors

    Ken Knowles, good evening. Up here old ash deafening is extremely common, there must be several hundred thousand properties with Ash between floors, and it is actually quite effective at noise reduction. Ash was [back in the day] cheap and plentiful the Old Builders found that if placed...
Back
Top