Search results

Funnily enough on the front of the shower the makers label states "house of amber".Yet the company is ultra showers. http://www.ultra-group.co.uk/products.asp?types=2&rangeid=105 Its was an awful switch to get of as there were 2 small 3mm nuts holding the switch on,unfortunately it was on...

Thanks for that. My shower is an AX310 and made by ultra-showers. Looks like i ll have to buy parts direct from them ,not many suppliers sells spares for this make of shower unfortunately.

I have a shower made from a firm "house of amber",and the bi-metalic switch has popped,and it is not reset-able. Does anyone know where a could get a spare. Model number of my shower is 53-558246. Lots of numbers on the switch itself ,but no temp setting etc. Cant find this firm anywhere...

Thanks for that i could see where the six plastic feet fit and slide under the drum,but couldnt understand what this metal strip is for in the center. NeilC

Thanks for that. There is a metal strip that sticks up ,they all have to be at a 90degree angle ,do you know how you attach the paddles to these. Thanks again. NeilC

All the drum paddles in my machine came off and all the plastic catches had snapped that hold them on the drum. I am getting 3 new ones sent,does anybody know how to install these or do they click into place. thanks.

I am trying to find out some information on my dads electric cooker. It is made by "Cookers".Model number B15E 021610029 power 4.170KW Does anybody whom are the main maker of this equipment,i cant find any information on the make"Cookers". The problem with it is ,when the fan starts...

A good one JohnD and point taken.

I am a marine elecky these days and since touching 40 we have to have a medical every 2 years,a elecky has to see numbers in a circle with dots,and tell the doc the number and colour,its procedure. As for certs ,yes i do agree in cases they are over the top but if they protect our trade from...

Thanks sleepyhead. Appreciated Coltmanneil.

Wonder if anybody could help me here??I have an indesit WIL133 about 2 years old.Noticed this morning while checking the drain pump a white plastic (foot)was lying inside the washer at the bottom.I think this is for keeping the drum stable.Only problem is there was only 1,i think there should be...

Thanks for the info ,hope its not the thermistor it looks awful to get out of the pipework,and its located round the back of the boiler.

I have a vokera linea 24 and lastnight noticed the temperature in the house was very hot.Noticed all the radiators were very hot indeed. When i checked the dial(temperature controller)on the boiler it was only half way ,but the temperature was at its maximum. Could this be the start of a PCB...

Had a similar problem 3 years ago with my linea 24.Where i kept filling the loop up and the pressure kept disappearing.When i called Vokera in as it was under warranty at the time,it was found that the expansion tank was defective.???So if you keep charging it up and the pressure goes down,this...

Thanks i will try that asap.

Can anybody tell me how to change the cable on a dyson vaccum cleaner DC04.There is a small hole behind the switch,i think you need a special tool to get into this hole then the panel will come of allowing you to change the cable.I have tried a thin screwdriver but it could be a torx driver end...

Want to change the door seal on my washing machine Indesit WIL133UKTE. I have done just quite a few things on washing machines ,but always had been told the door seal was a tricky thing to tackle. Any advice would be much appreciated. Thanks coltmanneil

Just had a lecico toilet fitted 1 month ago,and the toilet keeps blocking.I wonder if the flush needs to be altered,meaning more water in the cistern to flush. Help needed. Cheers.

I have similar snags to our friend in the above thread.I have just had every wall in the house skimmed ,we started with a bedroom and the stairs and landing using board finish.No cracks have showed here.I was then asked off my Plasterer to buy multi finish to do my living room and dining...

Thanks for that i ordered it this morning from farnell.Was a bit pricey must seen as i got the meter for a really good price ,the cover will protect it and hopefully keep in good condition. Thanks again. regards Neil