Search results

Wi-Fi repeaters (range extenders) do indeed improve the coverage of Wi-Fi. What is less well known is that there's a speed penalty when running the range extender in Wi-Fi mode. Catching the router's Wi-Fi signal the rebroadcasting it has a speed penalty. It halves whatever Wi-Fi connection...

Told ya. Good result.

I think you've answered your own question, though you've reached a different conclusion to me. You have the figures for the £££'s cost saving. It's then a personal choice about the convenience/inconvenience of using delay start. FWIW, I use delay start on the washer. I can come home in the...

The way capacitors fail is generally a gradual decline unless they get zapped with a big voltage. This expansion is due to the liquid or gel in the 'jam roll' formed by the charge plates drying out. As this happens over time, the charging/discharging process creates heat, and this accelerates...

I don't believe that's what's important here. If one device has a 2V output and the other a 3V output, then so long as the amp doesn't clip with a 3V (peak) source signal then it's all good. You're only going to be able to find this out though with trial error. What I think this all comes back...

I've filtered down to just the essential info. What this is telling us is that if the amp receives a 200 mV signal, and you turn up the volume to 10 (not 11, like Spinal Tap :LOL: ), then the amp will deliver its rated power output in whichever way they've specified it. A signal that's larger...

This Labgear 12v 300mA screened power supply for £12 from Amazon should cover most requirements.

^ This. Oh so many times, this. LOL

Do you have the amp manual or access to am online version? If so, what does it give as the input sensitivity?

You're welcome. Feel free to hit the Thanks button on any of the posts that helped you from any of the forum members. It's a nice bit of kudos. I can't say about the Bluetooth version of the DAC. The one that was tested from the earlier link is this https://www.amazon.co.uk/dp/B01MRII0D1 and...

Okay, so there's no DC offset then, or at least it's lower than the resistance during measurement or tool low for the meter's measurement range. That's good news. Where is the DAC getting its power from? It needs 5V which is standard for a USB connection, and it doesn't consume that much...

Some of the cheaper DACs have a DC voltage (an offset) on the ground shields from the RCA outs. This should be 0 Volts, but if they haven't used isolating capacitors in the circuit design then a voltage on here can cause problems for the amplifier or powered speakers the DAC is being used with...

No, don't use the Phono input. Sure, it has a lot of gain compared to the other inputs, but it also has an EQ curve called RIAA which is designed to restore the huge bass cut required to get music on and off vinyl. There's 40dB of bass boost and 40dB of treble cut. Those are huge amounts...

^This. I stream most of what I watch, but being forced to sit through adverts with Prime and ITVX is like going back in time 30 years.

The writing is on the wall for broadcast TV via terrestrial (an aerial), and via satellite. It has been decided that internet-delivered TV is the way forward. Exact dates for the switch-off of terrestrial and satellite have not yet been set. Terrestrial is certainly not 2030 as one poster has...

Not really, no. You don't Sellotape two bits of Wi-Fi together. You don't run Wi-Fi under the carpet at a door threshold. You don't staple Wi-Fi to the skirting board, crushing it in the process. You don't twist the braid and core of Wi-Fi together and stuff it into a plug. You don't fold up...

Everyone's mileage varies. Wi-Fi quality is hugely variable. The structure of the building. The position of the router. The quality of the router. Wireless congestion. Range. Number of users. The list goes on and one. A bit of cable. It mostly works, and often superbly despite some homeowners'...

Your cables in image ending 702 are most likely professionally installed cables for a satellite dish feed. The plug in image ending 809 is a standard TV coax plug, but that doesn't mean to say it's attached to a roof/loft aerial. With a back-to-back adapter, this could have connected to a...

The age of the aerial installation is new info, but useful. Thanks. I think if the aerial had moved then more than just one mux would be affected. All the main WH muxes are running at 100kW. If the aerial had have moved, I think your reception would be affected across the board rather just on...

Pulling any cable past just one 90 degree bend can be a headache.