Search results

Try a low modulus silicone...screwfix do one for £2.80 ??? that sticks to most things :)

It's part of the syphon and the best thing since sliced bread 8)

I fit loads of em. Get two gas bottles at least and buy an automatic changeover valve so as you don't run out halfway through cooking the best quality beef :lol:

NO but most saniflows will allow you to connect a waste from a basin into it.

20 feet per flow & return was what was recomended in 1976 by the then Heating council. Also when i did my ACOPS about 10 years ago it was again mentioned as about the same (metres this time) I did have the book and will try and find it :)

Just to confuse matters there are TWO different sized thingeys :lol: But if you phone Worcester they will send you both with next day delivery for £7 :D I have the smaller version of the key you can have for free :P

I like you :oops: How do you fancy an old Plumber from Brizzol :lol: http://www.users.globalnet.co.uk/~gunning/wurzpeak.html

Put a non return valve on the hot and cold feeds to the shower :wink:

I am a plumber living in an area that is nearly all stone and when putting a boiler flue through the wall i simply remove the stones and make good after..........simple :lol:

Shut bothe valves and undo the nut nearest rad (catch any water in bowl etc).Then open one valve and see if water comes out into bowl,then try other valve.....this will at least prove if you have water going to rad through both pipes...ie no air lock or blockage :)

Do you know for sure it's blocked :?: Get a hose and connect to a mains tap and stick one end down the cold feed pipe in exp tank and turn on water......if it comes out the expansion pipe then you either have no blockage or you have cleared it :wink:

I have fitted loads and most have a 2 year guarantee so you won,t have to go near it for a while :lol:

What size is the existing waste :?: A compression tee might do the trick :?:

Yer Tiz :lol: http://www.inspiredheating.co.uk/acatalog/IDEAL_CONDENSING_SYSTEM_BOILERS.html

Have a look here http://www.hrmboilers.co.uk/content/pdfs/wallstar.pdf

Is there laths on the external walls ??? My stone house only has lathes on the internal walls :?

email me your address and i will post you the real plug free of charge and its only a 5min job :D

That will probably be a £6 Diaphragm needed :D Plus someone to fit it...what boiler is it :?:

If you mean the plugs and vents at the top of the rad then i can send you some new ones i think ? (somewhere in shed) for postage costs only if you mail me your address :D

Thats the way i've done it for 35 years so good luck and one day you might be as rich as me :wink: