Search results

Thank you @oilhead Yes, it goes to lockout - assuming that it is the red light button coming on on front of burner. If I press it, it tries to start but just the fan runs for a few seconds then stops.

Hello, We had a leak inside the boiler (now fixed) but since then the boiler will not fire up. The boiler fan will start but I do not hear the normal whoosh noise I would expect. I took the red plastic cover from the burner and there is no visible sign of water ingress, so I am not sure what...

@johnny2007: I asked the supplier, but did not yet hear back as yet. @jonbey: Yes, tiles are on solid floor. They said screed will add + 3mm to floor. Tiles will stay beneath new flooring.

Hi @sircerebus666, No - I haven't, but I will do.

Hello, We have just had a quote from a local independent flooring firm and it feels very expensive to me, but I would be interested to hear if I am being unreasonable or not. Hallway of 2.5m x 2.0m with Project Floors distressed smoked oak going onto existing tiles. Was told there needs to be...

Thank you for the suggestion... defrosted it yesterday and all seems fine now. I couldn't see any air channels internally, perhaps they are on the back of it on this particular machine.

Hello, We have a Swan integrated Fridge Freezer (SRB2011W) and the fridge appears to be broken. Both yesterday and today the fridge bit was at 12 degrees and was silent. On both occasions I turned it off and on again and then it started to make the normal noise, to cool and behave as it should...

Hi lostinthelight, That's great, thank you. I had never heard of Lumiweld 'till now.

Hi John, The joint is recently cut, it is clean and rough (sawn finish) and can roughen up some more. I have plenty of clamps to help while the adhesive is curing but not real way of adding a brackets to help strength when glued. I have no experience of these mega-adhesives so it was more a...

Thank you Andy. Have you had any experience of gluing aluminium?

Hello, I have a Hitachi C9U circular saw which I dismantled for another (now abandoned) project but in the process I had to saw off part of the aluminium case. The attached pic shows the approximate line of the cut in red. The casing is aluminium and the gap left by sawing is probably <...

Thank you very much for your help folks, I did as you suggested and it now works perfectly. A whole load of air came out of the rad in question when I bled it.

Thank you, I will try this evening & report back.

Hello, I know this question has been asked previously, but I am stumped. I have one cold radiator in a bungalow with an oil fired boiler. I have checked / can confirm the following: All other radiators are hot from top to bottom Both the inlet and lockshield valves seem to let water through...