Search results

yes i did, the calculation is attached in my previous reply, can't you see it

the average area of the main house and the extension is 250 square meters. the Worcester 8000 style 35kw system was recommended by the first engineer who came around to provide a a quote and verified by others as well . However, when I checked Worcester website, it does also recommend it for...

i built an extension and upgraded my main house heating by installing all underfloor heating. And I am in a process of replacing my old boiler combi(Worcester 28cdi, see pic) to new Worcester 8000 style 35kw system boiler and 250L Megaflo unvented cylinder. there is only one small radiator in...

sorted,... the issue was hinge issue and not Toe and Heeled. to find out whether the problem related to Toe and Heeled or hinges is when you take the glass out. if the opening sash behaves in the same way then it is hinge issue and not Toe and Heeled. And there is an improvement or the opening...

all i need to turn the sash anti clockwise a degree or so

correct, ...if I can slid the bottom hinge right few millimeters and the top left few millimeters would be good and make the sash square but I am unable to do so.

check the glass and it is toe and heeled properly, I took it off and repeated the process again after watching few clips on youtube but still the same, no difference.

thanks, this means that I might need to screw the the last and the middle one in a different holes from the original ones. if so, the two holes will be overlap each other resulted in the screws will not fit tight, or Am I missing something?.

there are 3 screws, the back and the middle have tight fit circle and only the last one have a slot therefore the hinge can not be slide in any direction,

can someone help please

I know it needs adjustment but how, that is what i am asking.

this is brand new window only installed last year to our extension. it was shut since it was fitted and we I opened it this week I found the it catches from the top right corner. I have noticed that when it fully open, see picture "open position" the gape on the top left corner is bigger than...

yes but still can not work out what is the problem

Sealy 1.5 HP 24L air compressor does not build pressure. when it stars, build pressure slowly to 2 bar and that where it stays no matter how long I keep it running. and when I switch off it leaks from under the switch assembly (black box). I dismantled the switch assembly and can not see...

it is brand new one.

this test did not show me the faulty cable. perhaps my multimeter is not sophisticated to measure low ohms. however, I did what I call live test; I connected the wires at the cu to the RCBO, took of all the sockets off and left the 6 wires sticking out from each metal box. then switched on the...

still need help with this ring circuit, the RCBO tripped again after 2 days and does not switch on. But this time is a soft trip. it is not like the first one with a bang and spark. this tells me that there is no short in the circuit between live and any of other 2 conductors. the tests I did...

I have inspected the new rewiring of the whole house and the extension and there are 3 double sockets that are very close to the corners, about 75mm. I am hoping to get an electrician to inspect the house once I am done to provide domestic electrical installation condition report. will those...

what is the safe zone? do you mean it is very close to the corner?, if so, what is the safe distance from the corner. can you please elaborate more.

thanks Sunray, I thought of that but believed that might not be safe as someone may drill into the wall thinking the cable is always runs vertical to the socket either from the bottom or from the top.