Search results

There is a double socket next to the washing machine switch. Two red and two black and two earth come from the direction of the double socket, I presume these are feed/input. A single red, a black and an earth come from below ( above socket under worktop), I presume these are the load?

Switch above counter, socket below. Replaced switch with chrome fitting. Took diagrams of old switch wiring and replicated. Now neon only lit dim and no power coming through socket. Any ideas?

Ok the fan is sorted. But... The washing machine switch only lights up the neon dimly. I plugged an extension bar in to the socket but bar did not light up when switched on. I have loads and feeds correct. Can't figure it out, especially now there's no power coming from it. Any ideas? (efl, the...

Ok. So the extractor fan fused switch is next to a double socket. 2 twin and earth coming from socket side and 1 twin and earth coming from above. The one from above is obviously the load from the fan. So I take it I wire both lives, both negatives from the socket side to the 'in' or feed...

Yes, sorry, 20 amp switch above worktop for washing machine. I wired this mixing load and feed neutrals and the led light worked fine when switched on.(realised afterwards when looking at my diagram) Then after learning a little more as I go, I rewired it using the diagram I drew of how it was...

Hi I am replacing all socket and switch covers in my home to chrome versions. In the kitchen... 1) Washing machine plugs into socket under worktop but has fused switch above counter. When I originally rewired it and flicked the switch, the red led light came on as you would expect it to. Then I...

sorry are you saying to put both into the same hole? so have I to put the 2 red wires into the one (same) brown space in the block?

I have attached 3 pictures. the 1st light as you can see has 2 red lives and the 2nd light has 2 black neutrals, the third picture is of 1 of my new lights, thanks again

[/img]

Hi. I have 2 lights in my hall. I have a switch at either end of the hall. Both switches have full control over both lights. I usually install new light fixtures myself, but ive never done 2way lights before. I have 2 red live wires, 1 black neutral and one green/yel earth coming through...