Search results

Once I have fitted a Water Softener will it start to break down the limescale that has been building up in my pipes, Hot water tank and appliances over the years or will that always be there? How will it get into my central heating system? will I have to drain the old water from the system...

Thanks Hairyben If I move the sensor it will not cover the area that I want to light up on my drive. Some idiot recently tried to let my tyres down!!!

How can I stop my PIR security light turning on and of when its windy? There are some plants nearby that move in the slightest breeze which keeps triggering the sensor of a night. It has a Timer switch to adjust how long the light stays on, and it has a light switch to adjust the light...

Great thanks

How do I find Post 8?

But I have turned off all the other rads except this one and it still does not get hot?

Thanks but How do I find Post 8? Woody

Can anyone help? I have 1 radiator in the hallway which only gets luke warm whilst all the others in the house are hot! I have taken the radiator off the wall and turned both valves which both open freely and the water comes out hot! I have drained and cleaned out the rad that I removed...

OK I have turned all the Rads off exept the one that is not working. It has been pumping around the sytem now for about 20min and its still stone cold. The pipe on one side is warm and the other side cold. What does that mean???? :cry:

I will do that tomorrow when I get back home. What does it mean if it gets hot or not ? And what shoud I do? :?

I will try and shut all the valves exept the hallway rad and see what happens. Do I have to shut both sides or just the inlet valves?

I opened one side and shut the other and got a good jet of water from the bleed valve and visa versa. I moved into the house 2 months ago and it was not workin since I have lived hear. Thr pump is set at No 2 speed and still does not heat up even on No 3. It has poxy Microbore pipe.

Well I heard the rad filling up when I put it back on! :?

No there is not a thermostat valve on this rad. I opened one valve and heard the water rush in when I bled it then shut it off and opened the other side and heard the water rush in again when it was bled so I know they are both working.

The radiator in our hallway is not working. One pipe attached to the valve is hot & the one on the otherside is cold. I have taken the rad off, flushed it and checked that the valves are both working. I have bled it until hot water flows out the bleed valve, but it cools down once I close the...

The Sauna is outside next to my Spa which already has its own 20amp supply from the consumer unit. Could I come off this as I do not want anymore cables running around the wall outside of my house.! The Spa is powered from the Consumer unit in my garage and has its own C/B also in the garage...

I have just purchased a sauna with a 20amp 4.5 kw heater and I was wondering how I go about connecting it the the mains? The sauna is situated near a 13amp wall :cry: plug socket that is not used at the moment. Can I convert this socket with a spur or something to connect my sauna to?