Search results

I think I have resolved my own query now. Having rechecked all the website info for my local building control, It seems I have paid a standard fee for a garage conversion, which includes notification of electrical and other work. I.e it is assumed that if a garage conversion is carried out then...

As the original poster, having read through all the replies, It seems that even the experts can't agree. I suppose at the end of the day it will be down to the local building inspector and how he interprets the rules. Thanks for all your replies.

I am having a garage conversion done soon and as part of the preliminary work, I have had the consumer unit replaced. All fully tested and certified! The cu is in the garage and currently I have one socket and one light fitting in the garage. These were connected to their own circuits in the...

I sometimes wonder why I bother asking questions on this forum when you get answers like that.

Electrician fitted a new consumer unit for me. I had asked for 10 way as I needed 8, but thought a couple of spare ones may be useful in the future. The unit he fitted is a Wylex NHRS 10SSLH1 and is configured with two five way sections independently rcd protected. The remaining two are...

I'm planning a garage conversion. Rather than the traditional brick and window frontage to fill the doorway, I wanted to use upvc cladding below the window to match other areas of the frontage. I thought that it would be necessary to build a block wall and then clad with upvc. However I wondered...

Bathroom has a ceiling extractor fan, which is wired correctly with isolation switch outside bathroom, and cord pull on off switch in bathroom. The fan has overrun so has a permanent live connection. Everything works ok, but very occasionally when a light is switched on in another room, it...

I'm in the early stages of planning a garage conversion. The existing garage is integral to the house and I propose to split the garage into two sections. The front will retain the existing garage door and will be used for storage as it is now. The rear half will be converted into a useable...

I am planning to build a DIY kit conservatory using a steel base system the type that usually sits on concrete pads 45cm cubed. The area where the conservatory is to be sited already has a concrete patio approx 80 - 100mm thick. This is in very good condition, no cracks or signs of movement...

Daughter moved into a house with a Sime super 105 mk2 boiler. she had to have some plastering work done, so I removed a radiator. Whilst I was there I checked the boiler and saw water pressure was almost zero. Not being familiar with the boiler I couldn't see where the filling loop was, so said...

There are only two settings on the pump marked III and II. Extract from the manual:- 8.4 Adjusting pump speed The unit is fitted with a two-speed pump. The pump is delivered with the switch (1) set to position III (Fig. 8.4.). Attention! Important note: The boiler should only be...

Moved into a bungalow a few years ago which had a Vaillant Turbomax 824, which as a 24kw output. The system has always been noisy when it fires up, mainly pipework noises I think. Have asked service engineers about this but never got a solution. Whilst browsing the boiler manual I noticed it...

Remember ...... A frog is for life, not just for Christmas!

You could convert your room stat to a wireless one. They are available on ebay for around £30. Then leave the portable half of the stat near the tank and set it at 20degrees. All other rads could then be turned down.

I have been looking at buying a Salus programmable thermostat to replace a wired programmable thermostat, and came across this thread. After trawling through all the posts, it strikes me that many posters don't fully understand what a programmable thermostat is, regardless of whether it is...

Thanks for all the replies. We have warmstart turned off (it annoys us during the night) and don't have any TRV's so can count those out of the problem. I also considered the 24 hour startup and tried turning the boiler off electrically during the day thinking that the 24hour time would...

Yes I do live in a bungalow. All of the pipework is under floor and horizontal. I have wondered if it was a pipework bang, but why would this only happen when the frost protection activated? Where is frost stat? Is it built into the pcb?

The diverter valve is the new type with oval shaped ball. The original had the sticking ball problem. I don't know if the pcb is original as the boiler was installed before we bought the house. I think i know the clunking sound you refer to which happens when the valve changes, but this is not...

I asked this question last winter, but no one seemed to have the answer, so as winter is here again I thought I would give it another try. Boiler is a Vailant Turboxmax 824E about 8 years old and generally working ok. The boiler is located in an attached garage on a single brick external wall...

Had a new gas hob fitted and installer pointed out that gas supply was not earth bonded within 600mm of meter. From the meter there is approx 2metres of lead pipe which then joins to copper where the earth wire is attached. Some questions .... Is it possible to bond to lead pipe or will I...