Search results

ok thanks for clearing that up. Adjusting that chain to a short length is pretty difficult when the flush button is seated horizontal on the cistern lid!

I have installed a Fluidmaster (adjust-a-flush?) flapper flush kit to the cistern, but seem to be having problems with the flush volume. I have ensured there is about half inch of slack in the chain,and that the adjust a flush flapper is set to max. I only seem to get a short flush, unless I...

OK, thanks would I be right in thinking that the L and N feed from the stat would connect to the right hand side of the boiler connector block after the 2 amp fuse?

I have a Potterton performa 28 combi boiler that currently has no external room thermostat, which means I have to keep turning the boiler on and off at the unit to control temperature. I would like to add a Honeywell CM927 room thermostat as I have heard good reports on this product. My...

randoms

Ok, someone asked if they could have some pictures. Here they are: This is the upstairs light switch - note there is a single core cable running into that terminator block - if you could call it that! This is the downstairs light switch - note the black core it cut so only a single...

Thanks for confirming that this was a tricky wireup and I was not totally stupid! I got an electrician coming in tomorrow to give me a quote on a new CU, so il get him to have a gander at the light switch at the same time. Lets hope its not part of a bigger nest of bodged wireups behind the...

Hi, I recently had to rewire a fuse in my old style consumer unit, and stumbled across a product by wylex called a retro fit MCB. I didnt have time to look at the packaging in detail, but I got the impression that it can just slot into the place of the existing fuse block and give the benefits...

Since moving into my property a few months ago, I have been annoyed by the 2 way lighting I got on my landing light. This light can be controlled by 2 light switches, one downstairs and one upstairs, only problem is that one switch has to be in a certain position for the other switch to operate...