Search results

Yes, that the correct way Regards david

anyone got one, the door bell that lets you see who's at your door through a app on your smartphone if you're no in. The other half wants one so being a complete noob to all this kinda technical stuff I'm wondering what peopl s opinions are on it. Roughly costing £160 squid is there a...

As others have commented, ideally have you water feed and waste pipe in the cupboard next to the dishwasher as there is no, to little space behind dishwasher to accommodate

Smoke seal strips ?

Who laid the imprint ?

Does the soil pipe not vent through the roof ? If so I'd be more inclined to try and clear the blockage from there with proper drain rods. Or try plunging the toilet with a wick mop when the toilet bowl is full of water. Regards david

Any chance of posting a picture, as they say a picture says a thousand wirds regards david

They look like 1/4 turn ones. If you look at the picture you can see a little hole that will take a small allan key. If you undo that and lift the top of the tap cover off and take a picture that will help. Water does not need to be isolated doing this part regards david

Worse case just carefully break the one tile and replace pipe

Pictures speak a thousand words

Could have a pin hole in it which could would cause the symptoms you've got bud regards david

Have you checked the intercooler itself ?

Had a similar problem turned out to be a slight tear on the turbo intercooler hose pipe, so check all air pipes and jubilee clips are tight regards david

Cheers ,John will try that in the morning. Far as I can remember it's always Ben a bit slack tbh just not as bad as it is now mate regards david

Thanks John not sure it's the thread tbh as I've tightened it so it can't tighten anymore and bars still slip easy. Is there meant to be a shim or anything between the clamps ? Took it apart today and wraps some duck tape round it so it could be used. Ideally I'd like the part so it can be...

anyone have a idea where I can buy the bit that tightens the handles bars up. I've fully tightened the nut up but the cow bars are still loose making it a pain to use. Any bodges I can do as need to use it tomorrow and anyone one know where I can buy the part needed. Regards david

DIYKitchens.com seems ok in the process of trying them myself

Use a carbon filter ?

I'd pressure wash it first and see how it comes up will certainly remove all the dirt etc between the grooves

Will the old flexi not fit the new tap? If not 15/10mm reducer required