Search results

I just measured the one I have there. It's the first one you said . The wc-con8e. So, I think a normal one and extension piece will have to try that instead..

I was thinking maybe I could use a straight connector into the existing although I'd prefer if ya could get it, the first one you describe if the horizontal part isn't out to much.

I don't think if I take the tile out this would sort it. I'd have to go into the wall with a kangoo and this is alot of work, messy work too.

Excuse the mess. Few wipes and it'll be fine. The old pan connector is 160mm of the wall. See pic. From the toilet outlet, till the very back of the closed back toilet is 190mm. Is there any extension piece I can get to push that'll be 30,mm. I know this is extension straights but at...

The soil pipe is flush with the tiled wall. I hear what your saying. What is the alternative? Before I had a ridgid pan connector inside a cut soul pipe into the soil pipe connector. The only thing I can think off is to put the rigid pan connector back and try to line it up, push back and...

It's not the fixings. The top of the outlet is 230mm but when the flexi is a full 90, it's 250/260mm because of the old outlet in the floor. The only thing I can think off is a shorter flexi or cut this one but will I still get the bend I need for it. The last toilet had a ridgid pan...

This did cross my mind alougth I do have them where they are supposed to be.

Please see pics. I've installed a few of these closed back without any issues but when it comes to my own house, the one I got has tested my paitence I tell you. I even had to trim the back of it with a grinder because it was hitting the waste and water pipe. Now when I go to push it back, it...

How would one connect this light to another light where where you'd want either to come on with a sensor or the same switch to turn on where the arrow pointed.

Sorry, 75mm hole for 10.5w light

I'll have to recheck it but I'm sure it was a 63 diameter hole. It is very tight in the hole.

So it's basically continuing the loop to the switch instead of the LED. Is your N going to the N from the loop or connected to both the loop and light N. When I zoom in both seem to be connected. Same as the L connected to the loop and switch and connect the live from the outside light to...

Please see diagram of my parents house. There is a 1.5 t&e cable coming from the consumer unit to an outside light which then goes onto a switch wire. This light was working perfectly for years untill the bulbs ran out then it was hit with a ball and broke. It's never been turned on or...

I think the hole is 63mm or there abouts.

Why thou?

I will be changing my halogen spots in my open planned kitchen soon. Maybe I could use the 10.5w there and get new 7w for the ensuite. There isn't much to changing them. Is the 7w ip65 aswell for above shower areas

I might just scrape away some of the insulation at the side just to be sure. Most houses I work on nowadays are all having insulation in all ceilings, downstairs and up. I get it for free so why not install it in my ceilings I say. I can feel a difference in every room I have done it in so far.

I should have said no too haha. I thought they'd look good too which in away they do but one light would have been better. What do you mean if I have a gu10l2 fitting then no problem. I need to clarify this more. I don't have insulation above the light. There's just a void above it and a...

What do you mean a problem